XtremepowerUS Air Vacuum Pump 3CFM

Used for two different heat pump installations: a 18000 Btu and a 6000 Btu and it vacuumed both efficiently - one year apart. So it was still working great after a year in storage. I replaced the vacuum oil after that year - as recommended by the manual. Replacing the oil involves running it for about 15 mins to warm up and loosen the oil, then a hex screw to the front (have something to catch it ready underneath). The hoses and gauges worked for a nitrogen 300psi pressure test as well. Everything seems good quality - and held up to storage for a year in between uses. Would definitely recommend! If you plan on using the gauges for a pressure test, just keep in mind that some newer heat pumps recommend pressure testing at about 500psi which is beyond the accurate range of this gauge.

Worked perfectly, saved a lot of money doing this myself.

DOES NOT INCLUDE 5/16 MINI SPLIT ADAPTER This kit is GREAT and works very well for a fantastic price. The gauges are clear and easy to read. The hoses are high quality, as are the included adapters. I can't comment on the r134a puncture valve, I haven't tried that just yet. It's pretty quiet, it's not the fastest at 3cfm but for something like a mini split or home AC it's more than fast enough. I let it run until all indication of air in the line stops (bubbles or burbling sounds) and then an extra 5 mins to make sure. Easy squeezy and for the price, I don't know that you can beat it--even at Hazard Fraught. As someone else said, the little cap for the oil port is very easy to lose...but whatever. I bought this to install a TOSOT 18,000 BTU Mini-Split, but you could use it for anything needing vacuum. The video I followed to install my unit suggested this vacuum pump and indicated it included "all gauges and adapters", and this turned out to be incorrect. My ONLY beef with this item is that, as far as I can tell, NOWHERE does it list what size adapters are included. I wish that I could tell you what they ARE, but I can't, I don't know. I know that the standard mini-split 5/16" is NOT in the box. 5/16 Inch Female Quick Coupler to 1/4 Inch Male Flare is the adapter you'll need for a mini split. There are lots of options, the one I ordered was $7 and came in two days and fit perfectly. Pulled to -30 psi in seconds and cleared the lines totally within 5 or so minutes, then I let it run for a total of almost 20 minutes.

I was concerned when buying this kit due to the negative comments. Especially, the comments where people had problems pulling a 30 HG vacuum, suggesting the pump was not powerful enough. After a bit of research, I decided that the pump should be able to pull the required vacuum, so I gave it a go. When setting up the system, I realized two quality control issues. First, the high-side (red) hose was missing it's rubber insert. I found that out the hard way, by watching the system leak down to zero after pulling a vacuum. Fortunately, the kit came with 3 extra inserts, which fixed that problem. Second, the can-tap fitting has different threads than the yellow hose. You literally cannot connect the hose to the can-tap fitting. That crisis was averted as the kit comes with a few extra fittings that can serve as adapters, but they have Schrader valves in them (I think they are for systems with a different refrigerant type). I removed the Schrader valve from one of them and used it as an adapter -- it worked (I think someone put the wrong can-tap valve in the box). I was able to pull a vacuum without issue. Within 60 seconds, or so, I was at 29 to 30 HG. After letting the system sit, confirming no leaks, I ran the pump for 45 minutes to extract any moisture. The pump did great and held the system at 29-30 HG (for those who want to know, my location was at 750' altitude, 50 degrees F, 51% humidity, and 30.22 HG air pressure). The pump smoked a little at the start, but ran clean after that. I was successful in doing a full recharge. Even though there were quality control issues, I still gave this product 5 stars as the price was fantastic considering the tool's purpose, it was easy to use, and it was able to get the job done.

Excellent tool for what I need.

I love this set. I used it to install a small mini split and it has everything you need. Perfect! The service port adaptor that came with this ended up leaking and I switched it out with another one I had but even still, I absolutely love this kit. Having all the stuff you need all in one affordable package is amazing.

Already replaced a leaking service valve on my 07 avalanche on the high side line,vacuum pump works good went down to 30 in no time and left it running for about an hour to get all the moisture and recharge ac system the only thing you would need is the self tapping valve 10 dollars and that’s it,everything else is in the kit,don’t know how much I save but for 140 dlls is a great deal

Es un buen producto cumple su función ya hice el vacio a dos aires de auto y todo muy bien El único inconveniente q tuve fue en una llave del manómetro esta como barrida cuando la abres ya q no llega a un tope solo es cuando la abro Por lo demás funciona muy bien

fonctionne trais bien j'utilise régulièrement je la recommande

After using this product about a dozen times on various vehicles, certain parts started to fail. 1st the high pressure quick coupler seals leaked. Then the low side shortly afterwards. The R134a can adapter was next, not allowing refrigerant to flow freely, then the brass T fitting cracked and leaked slightly. Finally both gauges became inaccurate and unreliable. The only parts still working properly is the vacuum pump and hoses. Gave product 2 stars because of this.

Me ayudo bastante en cargar el gas a mi auto, haciendo vacio a la línea! Muy recomendable!

I tried to change pump and condenser without a vacuum pump. Worked for about 15 mins, then vapor locked. Put on the pump and ran it 2 hours, had air since. What's not to like?