CanaKit 3.5A Raspberry Pi 4 Power Supply (USB-C)

I used this power supply for a Raspberry Pi 5 with perfect performance and plenty of power for the attached SSD. The Raspberry has an attached pro Audio "hat" card that per manufacturer's suggestion uses a separate filtered supply. The picture shows the installation with his power supply coming in from the left of the Raspberry Pi enclosure.

I've tried multiple power solutions for my Raspberries but none give the results of individual power supplies designed specifically for the task. I run four Pis in a UCTRONICS rack mount, each with an SSD drive rather than Micro SD cards. This power supply runs everything I throw at the Pis and never throttles. The 'vcgencmd get_throttled" command always returns "throttled=0x0" regardless of load when using this power supply. Other power supplies and multi-port USB chargers will return other throttled statuses including "throttled=0x500000" which indicates throttling due to undercurrent. My only nitpicks with these chargers are: 1) The cables are very stiff and hard to route neatly into my rack mount 2) The magnet at the USB end of the cable is very large and interferes with cable routing as well 3) The cables are permanently attached to the brick and can't be replaced in case of a short, etc. I highly recommend this power supply and have bought four of them so far and will continue to do so as I expand my Pi fleet. I do wish they would offer a larger power supply that could run multiple Pis to eliminate all the redundant wall bricks.

Great device for starter projects. I turned this one into a retro video game console. Recommended!

I bought this after experiencing low power warnings and system faults with another manufacturer's adapter. This one has the correct power specifications. I am satisfied and would trust CanaKit for more Pi-related products in the future!

I recommend only buying this if you're planning on using it exclusively with your Pi4 and never for anything else. If you want a USB-C power supply for a different reason, you may want to consider a different device which can meet all of your needs. I bought this to sometimes power a Raspberry Pi and sometimes charge my phone, depending on where my Pi needs to be at that moment. I'm aware that it's not a QuickCharger, but the power supply that came with my ArgonOne case (with a similar amperage rating) will dump loads of current into my phone and charge it in about an hour, while this thing charges at a crawl. It could be a quirk of my phone, I suppose, or it could be a poorly implemented USB-C interface so that my phone is deliberately limiting itself to micro-USB levels of current (phone screen says "slow charging"). I know this power supply is capable of supplying more current because the RPi runs perfectly fine with it, even overclocked. Even so, since it doesn't meet all of my expectations while a different RPi 4 power supply does, I can only give it 4 stars.

It is nice, works. Perfect for the rpi4. The only thing to consider is the outlet in the power strip to ensure the block adapter will fit with any other devices plugs you currently are using. I previously purchased two and this is a third that I have finally got around to setup.

Works well for powering my PI, cord length is a good size for what i use it for. Seems durable and its a power cable that is easy to use. Is compatible with other Usb devices as well.

I had my pi4 plugged into a decent phone charger that should have been able to provide a solid 2.4A but I kept getting undervoltage warnings. For $10 it makes my Pi happy, so I'm happy.

Comes with a fixed flat 2-pin type plug, no idea what country that is for, and not a UK 3-pin plug and no adapter supplied, so useless for me after waiting weeks for delivery. Doesn't mention plug type at all in product details.

It powers my Raspberry Pi 4 with no problem. With a 3 amp PS I kept getting low voltage warnings, with this 3.5 amp unit there is no more warnings.

No sirve el amperaje reseñado. Devolución imposible por no ser gestionado por Amazon.

Für D nicht zu gebrauchen, da es mit US Stecker ausgeliefert wird. Könnte man auch mal dazu schreiben.

I am using this power supply for a Jetson Nano 2GB and it works perfectly. No more risk of power shortage when running GPU calculations.