DIY Open Frame PC Case,Aluminum Alloy ATX Computer Overclocking Test Platform Case,Adopt Excellent 20x20 Material Supports for ATX Ordinary Large Power Supply,Can Fully Enjoy the Fun of DIY…

For what you get its way overpriced, but its been well thought out. My tips for aligning the motherboard stand off are below. I got the stand off lined up in about 20 mins.1) only screw down the short bar that sits flush with the end where the PSU goes. Leave everything else loose including the stand offs.2) Put the mothe boad on by first fitting the middle stand off.3) As ll the fittings are loose you should be able slide the standoffs and aluminium beams around under the mother board to get all the other stand offs in position4) once it all fits slide the motherboard away from the PSU end and test fit the PSU yo make sure it sits on the 2 aluminium beams.5) Screw down all the aluminium beams as tight as you can6) carefully unscrew the motherboard from the standoffs a lift it off.7) The stand offs should be in the correc tpostion so fully screw them down to the aluminium frame being careful not to move them.8) everything should be lined up so screw the motherboard down.

Ideal for testing new components.I quite enjoyed putting this together. The instructions contain some dubious translation, but the pictures are clear enough.Pack also included power/reset switches, power/disk LEDs and a pair of gloves.