Arlo Certified Accessory, Magnetic Wall Mounts, Indoor/Outdoor, Designed for Arlo Go 1/2, Essential 2, Pro 3/4/5, Ultra 2 (+XL), Black, Pack of 2

Easy to use and fit especially suited for external fitting. The round magnetic mounts that came with my Arlo Pro (3 cameras) are nice for inside use, and they did work outside but the angles that you can attach the camera to were limited in that you couldn't get exactly the right shot of what you wanted to be viewing. Also i was worried that somebody may throw something at the camera to knock it off, although the magnets are strong. So I purchased 3 of these and they were really easy to fit, and i could set them exactly how i wanted, although I made sure they were high enough off the ground so somebody couldn't unscrew them, but you can get some additional security attachments to make it more difficult to take off. The brackets are solidly built and you can tighten the adjuster so it is really secure and wont change the angle unless you were to actually loosen it yourself. So i would recommend these, as the quality is great, and the way you can position the cameras is so much better than the supplied ball magnetic ones.

Very please and impressed. 5 cameras purchased and all outside. I have also discovered that you can use the Arlo cameras with a Nighthawk router have a look at this YouTube clip [...] what that means is you don't have to use I the standard base station So saves an extra gadgets but you might have to replace your existing router to do this. 6th Feb Update. I've had this system up and running now for over 2 months. I have had Duracel batteries in from 23rd December and 2 cameras have over 70% left and the other 3 have 100%. Advise to all those complaining of poor battery issue I say buy decent batteries. App easy to use. Working brilliantly Update 17th March All working well. And no issues. Update 27th April Ok here is the score on the batteries they don't run down even Lee which is not an issue to me what I suggest people do if they buy a battery tester and test each one of the batteries and throw the one that is Dud away and replace it with either another recycled or a brand new one however you won't get 100 percent battery percentage on your camera so just get over this point it's just a simple case of recycling of batteries and monitoring them yes it is a little bit of a nuisance but it's not cause me any issues. There are some people that have given for reviews and one recently about motion detection and camera lag yes of course there will be a little bit of camera lag but 2 seconds to 5 seconds is hardly going to end the world. Secondly and most importantly if you are just your cameras detections settings then you won't have issues it's all about using your cameras and set them up correctly because I've just read one review and it's all about detection the person hasn't spent time setting them up correctly adjusting them and getting the optimum range excetera period. I now have 9 of these cameras and I cannot endorse them better enough and also my parents have the same system yes my dad complains about the batteries Not Giving a complete reading in that some of the batteries are still hundred percent and others are dead however he's got over that point and now jiggles around the batteries as I do don't hesitate jumper this product it's excellent take it from one who knows. But if you need further information then send me a question and I'll be happy to address it

These brackets are well made, strong and ideal for outside. They also allow me to drop the charging cable out of an upstairs window and plug into my Arlo Pro 2's without removing or disturbing the cameras (once every 6 weeks). Don't waste money on cheaper non-Arlo ones like I did!

Very happy with my purchase

Genuine Arlo mount which is well built and very sturdy. I have bought after market housings for my cams which should protect the cams from bad weather but it means I cannot use the original magnetic mounts which came with the system. I bought a similar looking cheaper mount to try but sadly it broke on first fitting because it would not support the weight and to get it tight meant I had to overtighten it. It was clearly made of inferior materials. These genuine Arlo mounts have posed no such problem and definately worth a few quid extra. After all, you wouldn't want your £150 plus camera to come crashing down would you? I have read some reviews from people who have slated these because of a rust issue? Well, the towers themselves are made of cast aluminium (wont rust) and the threaded part has to be made of steel to have strength. So, spray a little WD40 or similar oil on to the thread and shaft, wipe the excess off and you should have no problems. Do this a couple of times a year and you will ensure longevity of these mounts. Don't forget, anything we fix outside will be exposed to the good old British weather so a little bit of basic maintenance will go a long way. I can certainly recommend these mounts.

On the plus side, these are really easy to install - one screw and you're done. Unfortunately the mount is not the strongest of things and I have had to re-position the camera several times because it has 'drooped'. That said, it's a whole lot better for outside use than the magnetic mount.

Whilst looking and reviewing this type of mount on Amazon, there are much cheaper versions out there. Do not be fooled! This is a quality mount, built of steel and very nicely made. In the box you have the mount, three screws, three plugs, decal warning people you have Arlo security system and a small instruction booklet. Putting the mount up was no problem at all. You can then point the camera anyway you want! I am very pleased with the quality of this item and is suitable for my Arlo cameras.

Better that the Eufy mount that came with the camera. Adjust to the correct angle then tightens in place.