BOSS Audio Systems MRC5B Marine Waterproof Radio Cover

Nice piece. Easy install. Fast Shipping.

Works and looks great for the boat. Works with any single din radio.

Works as described, I had to modify mine to get my radio to fit as the molding was too tight of cut. Be prepared to trim if you have a know less stereo

After reading reviews I was concerned about the quality of the hinge on the door. I can say mine was very good and works perfectly!very pleased. Installed a single DIN Kenwood deck. Opening for deck was very tight but was able to get the mounting sleeve in without tools or sanding as others have stated. Installed in under 30 minutes with no problems. Used a lot over Memorial weekend and love it! Would recommend. Very sturdy and door stays open when you want it too and closes tightly.

Just as advertised easy strike the extremely easy to install

I like that this enclosure allows me to use a single din radio system on my 2022 can am Maverick X3 max RS turbo RR. I installed a marine stereo with 4 marine 6.5 speakers and a 12" Sub box all for about $250. Now the x3 jam's with all the bass you could ever want hands down 10x better then any speaker bar out there.

Exactly as advertised, worked perfectly. Shipped and arrived as promised.

For practical use I would give this unit a 4 or maybe 5 stars. For design (most likely in Asia) I would give it a one. Please read, as if you are an novice stereo installer you might hit some bumps with this design. First of all the good: Once modified and installed the housing looks good, feels sturdy and should work quite nicely. I'm a little suspect of the hinged cover, but where mine is installed it will be out of the way of knees and elbows, So, from the beginning, make sure you have some sandpaper or a fine file, as on my unit the face-plate that your DIN mount slides through will probably need modified. It IS a single DIN opening, but the flash from the plastic molding wouldn't allow my chassis to slide in until I sanded it vigorously to widen and square the corners. Once the chassis is in the housing, it's time to connect the back-plate to the wires from the stereo. This does make the unit technically more water resistant, but adds an extra step as you have to connect the wires from the harness of the stereo to the back plate of the housing, then connect it again to power, ground speakers. One really bad design flaw in the back plate is that it does not have a wire for remote connection of an amplifier (typically a blue wire) It does have two sets of pre-outs and all of the other wires. The other bad design flaw, which will catch you if you don't pay attention is that the back plate wire that come out of the housing (and inside) are not industry standard color coded. Most all car stereos have a four color standard with black stripe for the negative. This unit does not. You just have to be careful to write down what speakers you connect to the wire on the back plane. Then, you have to use a dremel of other precise grinding tool to make room to run the remote wire from the receiver to your amp . That's the good and the bad. It was a bit more work than I anticipated, but really looks good after "fixing it"

Super Schutz

Very easy to install

Used it in my boat and it worked well kept the radio dry and saved the buttons from sun drying

El equipo fue perfecto cumplió con todas las expectativas, tiene una buena calidad precio, con un buen material y buena resistencia.

Facile à installer