Deco WiFi 6 Mesh System (Deco X20) - Covers up to 5800 Sq.Ft, Replaces Wireless Routers and Extenders, 3-Pack, 6 Ethernet Ports in Total, Supports Wired Backhaul, Dual-Band WiFi

So far I’ve been using them for 2 years. Pros: they are very easy to set up, great quality, they do not drop connection, very stable internet as long as you set them up right, the app allows you to label them, they work fine for connection up to 1Gb. Make sure you connect your main to your modern near an open space centralized and with an Ethernet cable cat 5 or higher. Each has a duel Internet port in case you want to hardwire into a device instead of wife. Cons: the app sometimes prevents them from working properly so sometimes you simply have to open up the app so it can reboot itself, after a reboot sometimes they don’t automatically start working (so you must unplug the power of those showing red, will quickly reboot and show green), my biggest issue, the app displays usually the wrong speed, sometimes showing mbps or kbps, speed fluctuates a lot, even when you perform a 3rd party speed test, not exactly sure why. Location is a must, you must make sure they are set as close to each other as possible while getting a strong signal ( must play round to find the sweet spot). Over all they are great if you set them up properly, they provide great internet, very easy to use and set up, requires no maintenance but updates, so far I’ve had no issues for the last 2 years. I would recommend the Decos.

You will not regret this choice. Having a reliable mesh system circumvents the need to pay outrageous prices for internet speeds that nobody on earth actually needs. Believe it or not, but you probably don't need more than 100Mbps in your entire home and this device allows you to better utilize every last drop of it. After doing much research, I figured my WiFi needs would be met with the absolutely lowest Spectrum tier of 100Mbps, but a much router or mesh system as the problem was not the theoretical download speeds but the quality of connection. Having a mesh system would allow me to downgrade my bill, as well as saving $5/mo on the "equipment rental" fee for using the Spectrum router, and yet still be able to stream 4K on every device all at once if I so pleased. I live in a one bedroom apartment, smack-dab in the middle of a sea of apartment complexes in a big city so there's a lot of competing signals bouncing off one another. While everyone said all I needed was a better router, my experience proved otherwise. Speed wasn't the issue at all, but latency and spread across the apartment to my 12+ devices. Constantly I suffered from buffering issues, especially surfing the web or watching YouTube. But I didn't need to go faster on the highways, I needed more lanes on the highway for all the cars to run parallel, and to increase the overall range. This is the benefit of a mesh system over a traditional router, as well as the ability to roam from Deco to Deco based on bandwidth/proximity, allowing better prioritization. I've stuck with TP-Link for years, having had seamless experiences with all of their products from WiFi cards to WiFi bulbs, and for much less cost. This was no different. I was very impressed with their easy, intuitive and speedy setup. The app is sleek, and its fun to see which Deco everything is connected to and witness it switch around as bandwidth demands change. The WiFi, despite being much slower on paper than the 400Mpbs I was receiving since the start of 2024, has been a massive improvement, and for less than half the cost. As a stress test, I played a 4K streaming movie on one TV, streamed 4K YouTube on my computer, another 4K video on my laptop, played 1080 streaming movie on another TV, and did an online speed test all at once. Never a single buffer on any of the devices and the speed test still managed to download over 100Mpbs anyway with a 12-14 ping. That's plenty of internet speed and then some. Over 30 days later, its still flawless. In the end, I only wound up using 2 of the 3 Decos (but glad I have the third for only $10 more, just in case). Now, I'm not kidding when I say I actually profited from downgrading my WiFi, and I invite you to do the same... First, I dropped Spectrum, and went over to T-Mobile for $40/mo for exactly 3 months. I qualified for a $200 debit card rebate after that, which I used to pay off my phone/internet bills. I cancelled T-Mobile's internet after the speeds were awful, went back to Spectrum once I qualified for their promo rate of $30/mo for 100Mpbs for two years. So, since July, I have paid T-Mobile 3 months ($120) and will pay Spectrum 3 months ($90) before 2025. That means I paid $10 out of pocket for 6 months of internet after the $200 rebate. Of course, the mesh system sets me back $140, but over the next two years I'm saving $5/mo on router rental fees ($120 after two years). So, it pays for itself. And because its WiFi 6, its backwards compatible and will remain relevant for several more years at the very least. I estimate that in two years I will have saved a total of $960 in internet speeds after the cost of the Decos.

This war so easy and fast to set up I was very surprised and ecstatic! It hooked up in minutes and the strength and quality is 100%!! Everything in my home,TV’s, computer laptops, cellphones, and Alexa’s set up in seconds and functions more than expected. My internet speed is 10x’s faster than Spectrums routers and this is set up without extenders. Now my internet speed is faster than spectrum’s! If you’re looking at this and considering it, just get it!

UPDATE 29-Sep-2024: I'm totally satisfied. ZERO issues, works beautifully. I had this at 4-Stars to start as installation and set-up went smoothly however I wanted time for it to "bake-in" with use., now I'm at 5-Stars. There is a TP WiFi 7 model available that does cost less than other vendors, still expensive though. The WiFi 6E was $188 for the pair, WiFi 7 is $449 for a pair. That's a big jump, and yes, from what I've read you'll get higher performance. The question that needs to be asked: Do you need it for the extra price? If you can easily afford it, no reason not to. I've worked for 30 years as a network design/architect/consultant in the carrier industry. As described below, for my requirements the TP WiFi 6E is perfect. In 5 years, I may need to look into upgrading to a higher grade mesh. By then, prices will come down for a WiFi 7 and maybe when WiFi 8 is out that'll be a consideration. For now, WiFi 6E works. I give routers a 5-year life span as tech improves rapidly, but do you need annual upgrades? Not in my world, yet. I'm still waiting for 5G cellular service in my rural setting yet I do get 80Mbps down/19Mbs up (Verizon), and in some places in Colorado Springs I've clocked 1.3Gbps on my iPhone which is insanely fast. My iPhone does provide good hotspot backup if needed. If you have a "Brady Bunch" size family, maybe the WiFi 7 would better, and you may need more than 2 routers in the mesh depending on your house, basement, patio, number of devices and floors. The nice thing about the TP mesh is adding more as needed is easy, as it should be today. GENERAL: 16-Sep-2024 I needed a new WiFi mesh solution. I'll explain why in a bit. For 99% of the users at home, basic settings should be fine. For those with bespoke setting requirements, they know what needs to be done. This isn’t a commercial grade device like from Cisco or Meraki although for small offices, I think the XE75 would be excellent. DETAILS TO CONSIDER: I’m using the TP Deca XE75 – be SURE to know this, not Deco AXE5400 as this is not a choice when registering via the app. I use just a pair in a 3,800’ slab-on-grade ranch. Each XE75 works at 2.4/5/6Ghz. There are 3 “Networks”: Router, Guest and IOT to isolate connections. Pricing was excellent at $219 for the pair + a $30 discount coupon! This is not a Base plus Extender, these are both full-function WiFi routers with the first one setup being the Main. They each have 3 UTP Gbit ports. I only needed UTP on the Main. Password, frequencies, ect settings are all transparent across the mesh network. You can click on each Wifi router in the mesh to see what is connected to each. Each SSID will have its own password. Be sure to use Upper/lower/a few numbers/a few special characters, and MAKE SURE TO JOT THEM DOWN! SSID Router and Router_6Ghz + Password you create - iPhone, laptop, printer, SAN/NAS SSID Guest + Password you create: if I have visitors SSID IOT + Password you create: all other connections like Hunter-Douglas PowerView (motorized Roman shades), TVs, 22KW Generac generator, DTV, DVD, etc that have vendor access for updates and such. SETUP: SUGGESTION: Unplug your ISP equipment before you start setting up the app. My iPhone just downloaded via my Verizon cell connection nicely. This gives your ISP equipment the 5 or more minutes to quiesce (shutdown, clear). When I connected to my ISP equipment and powered-up, I called my ISP, they saw the new device, authorized and in a few seconds I was back on-line. Download the TP App, and follow the instructions step-by-step. When setting up, each XE75 has a barcode on the bottom that needs to be scanned as you set them up – easier than typing in the code. It’s a tad fuzzy to scan, just don’t give up. I used an iPhone 13 Pro to scan and was surprised how difficult it was. Just follow the instructions at setting up the router EXACTLY (keyword=EXACTLY) as they say. The app will ask you to name it, I used Office from the choices, and I think you could do a custom name. With my ISP, I have to call and tell them a new router is being connected so they can authorize it for security. My ISP is a local company in Colorado, Kellin, that services remote areas hence microwave (plans in the next 12-18 months include going up-to 500Mbps - way more than I need), and support is seriously fantastic after more than 10 years. The UTP ports (3 on each route) support 1Gbps. The TP should work for all ISP, probably even StarLink although check first to be sure. The App set-up worked great as I followed the instructions EXACTLY as they specified. Next, I created PASSWORDS for Office, Guest and IOT networks. Next, I added the other XE75 to the mesh using the barcode reader, and boom, up it came, connected to the mesh and I named it Bedroom. On the App you’ll see: ISP icon---Office/MAIN icon----Bedroom icon (these are my locations) plus you’ll see how many devices are connected to each with a footnote number for each. Nice. Next, I started discovery for Router – my laptop runs at 6Ghz. BTW, UTP connections go to Router only that I can tell, not Guest or IoT Next, I started discovery for IOT No Guests yet, however, they should connect as easily Under “More Settings” at the lower right corner of the app, click and you’ll see Wi-Fi Setting (Main Network), then Guest Network and IoT Network. Pretty straight forward; naming Wi-Fi Setting the same as the Main Network would make better sense at least to me. In Wi-Fi and Guest Networks you have 2.4/5Ghz and 6Ghz network options. In IoT you only have 2.4/5Ghz. I turned off 6Ghz for Guest as 2.4/5Ghz will be fine plus you’ll get better distance and plenty of bandwidth performance. If I need to connect my laptop to Guest or IoT, my laptop selects the highest frequency. My iPhone 13 doesn’t do 6Ghz. When I upgrade my iPhone in a year or 2, it’ll probably have 6Ghz. PERFORMANCE: My microwave ISP is 120Mbps Up/Down, plenty for me. I don’t game or have kids. I work from home as a consultant, do WebEx/Zoom/MS Teams video calls that are excellent quality, I’ll watch an Amazon Prime movie now and then, I use DirecTV not a streaming or cable service. So far, performance has been flawless. Generac has “issues” with mesh networks – this is on them to fix as it is 2024 and it is not a $50 device, but that is for another review. (Generac works great, it’s the 2.4Ghz WiFi set-up that is archaic.) If you do have a Generac, the best way is if the remote mesh router is near the Generac, turn it off and force the Generac to connect to the Base. Then, bring the remote router(s) back on-line. This seems to fix the stupid problem. And yes, it is stupid for a $17,000 device as it should have a great WiFi solution, it doesn’t. This is a problem for Generac with all mesh networks, not just TP. I did a lot of research and found a good work-around solution Reddit. For the price and performance, I think you’ll like this device. I only have the main and 1 remote. More remotes, no idea. My video calls, streaming with Amazon Prime (Netflix should be OK, I don’t have it) and gaming should be fine (I don’t game). Another thing that will affect performance over the Internet will be your ISP’s quality. They say like 1-Gig service however, that is the max you’ll probably get. During busy times performance may degrade based on how many people they support – it gets complicated with over-subscription to bandwidth during peak hours. Clearly, more users will be on between like 6PM and Midnight than at 1PM or 3AM in a residential area: streaming movies and gaming uses a LOT of bandwidth. That 1 Gig you subscribe to is not 100% all the time. This has nothing to do with TP or a home set-up. AND NOW FOR SOMETHING COMPLETELY DIFFERENT – Why TP? 2.4/5/6Ghz: What’s the difference? The higher the frequency, the more data that can be transmitted. Problem is, as the frequency goes up the ability to penetrate walls drops. 2.4Ghz carries less data however it penetrates walls better than 5Ghz and 6Ghz. I won’t get all wonky. Extenders are the reason they are needed in large houses/multiple floors to penetrate hence we have mesh networks today as single WiFi devices have distance problems at higher frequencies as more data is needed like for gaming, video, streaming, phone calls, ect all at the same time. I had to replace my Netgear Orbi 850 w/1 satellite. The Base unit UTP ports stopped working which means I lost ISP access and UTP devices. My hardware warranty ended 7 weeks prior. I paid over $600 in July 2023. I contacted sales to see if I could buy a refurb'ed 850 base at a decent discount. Nope. They just said your hardware warranty has ended - I was up-front and told them that. I connected my laptop to my ISP and it came right up. They wanted to troubleshoot. Waste of time. Duh. I’ve used Netgear for over 20 years, routers, WiFi and LAN switches. I upgrade when needed. This Orbi 850 issue and how they handled it was poor. This wasn’t a $50 device. And, now I have an Orbi 850 satellite I need to sell on eBay, the base will get recycled. Will I ever buy Netgear again? Extremely unlikely. I like the LAN switches, solid, reliable, lifetime warranty on the ProSafe products however I have all the Gigabit LAN switches I need as WiFi speeds get better. I tried the eero Pro 6E mesh Wi-Fi router, $184.00 + 20% rebate + $100 credit sending my Orbi back. Great deal. My ISP recommended eero. The set-up was a tad awkward (I wrote a review) and I got through it. Connected my devices and all. I noticed my laptop had really poor performance and disconnects. I decided to buy the eero Extender & wall mount total $95, neat set-up. Got it, however, my laptop kept going to the base router, never the Extender. The problem was the Extender only handles 2.4/5Ghz, not 6Ghz. I have no way to disable 6Ghz on my laptop, this is a deficiency and Lenovo support was no help. I called for eero support to see if a 2.4/5/6Ghz extender was available or if I could disable 6Ghz on the Base Router. No to each question. At least TP allows you to disable 6Ghz. The recommendation: buy a 2nd eero Pro 6E mesh Wi-Fi router, and now the price ~7 days later was $249. Not having an Extender at 2.4/5/6Ghz when the base equipment does is silly given we are now seeing WiFi 7 being released (EXPENSIVE though). I sent the eero stuff back for a refund. Had the eero Extender provided 6Ghz, I would have kept it as it did work really well, 2.4/5Ghz is fine for my house, and a new laptop would have cost a LOT more. If your device doesn’t do 6Ghz, eero would be fine. However, as with all technology we’ll see upgrades with new devices in the coming years. If you have a device that can’t disable 6Ghz, you'll have a problem. If you are still awake, I hope this helped.

I have not had any issues with this mesh since initial set up. The set up is easy to follow and straight forward. I did have a minor issue, but that was on my end and my service provider was able to give me the correct information needed to set up. It has been running now for about 4 months and we have had steady connection across all devices - computers, TVs, gaming systems, smart home and surveillance systems. The back room that was often a dead zone now gets a good strong signal. I like that I am able to hard wire certain devices into each unit if I want to. We currently have the main home computer connected to the second unit, and the Xbox and smart TV on the third unit. Not that any of these devices were experiencing any lag or connection issues on wifi. It also has the option to set specific devices to priority on wifi or to set a device to only connect to one unit rather than the mesh to maintain a steady connection on items that are stationary. The parental controls are also a great feature. You do need to pay to unlock everything, but the free features are enough for my needs. It allows to filter content, block websites, and set up screen limits. The only inconvenience on the free side is that you cant set multiple time limits for differentdays of the week. While I can set a bed time daily, if I want to give extra time on the weekend I do need to manually reset it every week. However, it is not a big deal with the app. Wifi to all devices you set to your child's profile will be turned off at the time you set, and not turn back on until a time you set. Bedtime routines have gotten smoother as they quickly learned there is no "just a minute". They now take note of the time and hurry to finish, save their progress and say goodbye to friends before the time runs out.

I had a simple setup, which most of us have in our home a ISP router with a Wifi AP point installed in a central location. As I started adding more and more devices I started to have issues with the ISP setup and started looking for options. TP link was on sale and had read good things about the Mesh WiFi. No more dead spots and consistently get good speeds all around. Initially had a lot of trouble with the setup, contacted TP link support which I believe is still out of China. I had to undergo a lot of Troubleshooting with the TP link engineer which took two weeks and the final outcome was to RMA the devices. I have read forums and looks like some of these devices do have issues. TP link RMA policy is to ship the units back before they send a replacement. They do not pay for shipping. So if you have issues contact Amazon for replacements immediately. Pros:- 1.) Easy to setup. Deco app guides through the process of installation and also is less buggy. 2.) Homecare which comes by default for lifetime on the these devices is a good selling point 3.) Parental controls are good, at least I found them to be good for my purpose 4.) Have tested a 3 device setup with almost 60 devices turned on at a given time and it has worked as expected 5.) Have not had issues with smart devices which only use 2.4Ghz Cons :- 1.) Some of the new devices are plagues by issues which results in replacement of the entire unit. I had to replace 3 of my units 2.) TP link should be open about hardware revisions and what changes they bring in with such revisions 3.) RMA policy requires owners to bear shipping cost, not like Amazon return 4.) Turn around time to get a senior engineer at TP link to work on troubleshooting could take 2 weeks, since I believe engineers are in China.

Im using it in addition to a huwawei modem that has internet connection from a 4G sim card. I connected router to this device with the included wire and spread the 3 connection points between two floors. Now I have very strong coverage in every room!

Product is sleek, setup is easy, good user interface for the mobile app. Speed is decent. WIFI/internet keeps dropping especially during video calls, watching netflix, etc. Reached out to TP link support...need to remind them multiple times. You cant get them on the phone....only through chat. This hasnt helped and I have wasted my time for over a month expecting they will fix it. Now I am stuck with a router that I just paid decent money for that is worse than my 5 year old router. Stay away!!!

Let me start by saying that the TP-Link Deco AX1800 WiFi 6 Mesh System has completely transformed my home network experience. As someone deeply immersed in the world of digital content creation and online connectivity, having a reliable and high-speed internet connection is paramount to my work and leisure activities. The Deco X20 mesh system has exceeded my expectations in every way possible. First and foremost, the coverage provided by this system is truly impressive. With its ability to cover up to 5,800 square feet, I no longer have to worry about dead zones or weak signals in remote corners of my home or office space. Whether I'm streaming high-definition content, engaging in bandwidth-intensive gaming sessions, or conducting virtual meetings, the Deco X20 ensures that I have a strong and stable connection wherever I go. Moreover, the transition between individual Deco units is seamless, thanks to the mesh networking technology. I can move from room to room without experiencing any drop in signal strength or performance—a feature that has greatly enhanced my productivity and workflow efficiency. One of the standout features of the Deco X20 is its support for WiFi 6 technology. This cutting-edge standard delivers faster speeds, increased capacity, and reduced latency, providing an unparalleled online experience for all connected devices. Whether I'm uploading high-resolution videos, downloading large files, or streaming content on multiple devices simultaneously, the Deco X20 handles it all with ease. Additionally, the built-in parental controls offer peace of mind for families, allowing them to manage and monitor their children's internet usage with ease. With customizable filters, time limits, and usage reports, parents can ensure that their kids are safe and responsible online. In conclusion, the TP-Link Deco AX1800 WiFi 6 Mesh System has truly raised the bar for home networking solutions. Its expansive coverage, seamless connectivity, and advanced features make it the ideal choice for anyone looking to elevate their online experience. Whether you're a content creator, gamer, or simply someone who values a fast and reliable internet connection, the Deco X20 delivers on all fronts.