Surco 502L Universal Straight RV/Motorhome Aluminum Exterior Ladder - Compatible with All RVs with Vertical Rear Panel Regardless of Make or Model; Brite Dipped Polished Finish

Was the perfect size for a small Class B (TransVan) it mounted very securely to the back of the unit. I give it 4/5 for sturdiness, because it came in pieces. It's not as rigid as a solid ladder, but it supports my 220 lbs, and looks great on my camper. Also, the top loops came off, which allowed me to adapt it to a rounded roof. I give it a 4/5 on easy to install because it was a little difficult to install. I had to find studs, mark them, level it, and then the roof was curved. I would say that I'm expert (30 year) auto and RV mechanic. It took me about 2.5 hours to install. Also, I provided my own stainless screws for mounting. Some were included, but I preferred the ones I bought.

It comes in two pieces that fit together very well. It was only the lower four feet of my old ladder that was damaged so, I cut the old ladder at the point where the lower part of the new unit was made to slip inside the top half (of the new unit) and fitted that section into the good part of the old ladder. Worked beautifully and was a lot less work then replacing the entire unit! Otherwise, the rooftop section would be in a totally different place, requiring roof repair also. I used all the old "stand-offs" and added a couple of new screws to each stand-off. Much more sturdy now. Rodger Morales 6/23/14

Very easy to install you definitely need a hand saw with a metal blade or a sawzall with a metal blade tape measure and level and definitely get a good quality Small Tube of silicone and then you are good to go very sturdy I weigh almost 300 pounds and I go up and down this ladder and it is feels very sturdy and holds me no problem

Ladder was decent, but like many other companies, they don’t like to waste any time making clear directions you had to be able to figure out hieroglyphics what a shame today how companies operate.

I had to modify the ladder for my motorhome but it fits and looks great.

I bought this ladder for my 1994 Tioga Montara, which has a straight back. Unfortunately for me, the edge where the roof meets the backwall is curved. This ladder would work if that edge was 90 degrees, but on mine the roof mounts were too short and came down on the curved part where there is no stud to mount it too. Luckily for me, there was an electrician at work who was able to bend some pipe for me which I was able to use. The ladder itself is pretty sturdy, but it is not "Universal" fit.

This scrubber does a great job. I have rough stone flooring in the bathroom and walk-in shower. I was going through sponges with a scrub backing cleaning soap and shampoo residue.at a rapid rate. This scrubber cleans the uneven surface and grout nicely and quickly. And it holds a charge of a little over an hour, It also cleans the bars on my kitchen's shelf racks that are over the stove of the cooking grease that accumulates without having to remove all the pots and pans. It has made my housework so much easier and faster.

"Universal" in this case means, "you will have a LOT of custom work, you will need lots of tools, including metal cutting saws, and precision measuring devices - and LOTS of more holes to drill into your RV." This is NOT a replacement for your OEM ladder and this will NOT fit your brackets. This, is a hunk of garbage - that you should not order. Learn from my mistake.

This was an easy install on my 2006 bigfoot camper. Depending on your skill level, the only thing to think about was trimming the top of the ladder to compensate for the curve of the roof. Good and solid. Good buy

Standard Good quality

Won't be put on trailer till spring time but looks good hope it fits okay.

C’est une nécessité pour vérifier l’état du toit pour les fissures,les bris de l’air conditionné,l’état des évents,et le lavage du toit,

Ladder was very easy to install but you might need a pipe cutter or hack saw to cut the aluminum to adjust it to your rv. You’ll also need metal bits for the drill to make new holes where you adjust. After that it went on well and the screws that came with it had good teeth for digging into the rv.