Tenergy Combo: Universal Smart Charger: 6v - 12v #01025 (Version 2) + 2 pcs 7.2V NiMH 3800mAh Battery Packs

Description

Charger FeaturesBest Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12VCharging Current 1A for battery packs with capacity from 1000mAh -1800mAhCharging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hoursUse pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack's cycle lifeWorldwide usage with 120-240V AC* Meet UL 60950-1 Safety StandardsCharger Accessories1 standard Tamiya connector with Temperature Sensor.1 adapter from standard Tamiya to Mini Tamiya. 1 adapter from standard Tamiya to a pair of alligator clip.Charger SpecificationsInput: AC 100-240VOutput: 6-12V, 1A or 2ABattery FeaturesNiMH technology enables convenient charging at any time. No cell memory effect. No need to fully discharge before recharging.High power delivery with 30 Amp maximum discharge rate. (Tamiya connector's max current -- 30A)Technical Specifications Standard Dimension: 5.39"x1.87"x0.95" inch, fits all RC10 cars Weight: 13.5 Oz Capacity: 3800 mAhVoltage: 7.2VConnector: Standard TamiyaStandard Charge: 12 hours @ 300 mA Rapid Charge: 1.5 hours @ 3000 mA Package comes with:1 x Tenergy 6V-12V Charger2 x Tenergy 7.2V Flat NiMH BatteriesWARNING - DO NOT CHARGE LiPO Batteries-DO NOT CHARGE: if the label on your battery says: LiPO, LIPO, Li-Po, LI-PO, Li-Polymer, Li-Poly, Lithium Polymer, Li-ion, Lithium-Ion, Lithium.-Caution: LiPO battery packs may often have two sets of leads/connectors - do not charge if identified as LiPO battery.**Failure to follow these warnings may result in fire or personal injury.**Contact our customer support team if you are unsure if your battery can be charged. Review: Awesome Product - I bought this for my Axial SCX10 Jeep Wrangler Unlimited Rubicon. Awesome battery and charger. Does as it says. Pros: 1.Recharge time is quite less as compared to other chargers. 2.Two options(0.9A and 1.8A) to charge various mAH range of niMH batteries. 3.Looks tough and durable. 4.Extra connectors are given to charge batteries with various connectors. (by default is tamaiya connector) 5.Heat sensor to check the over heating of the battery. 6.Battery runs for a long time after full charge. My SCX10 runs for around 40+ mins on one 3800 mAH battery. 7.Lights to indicate battery charging,full charge and faulty battery or connection. Cons: 1.Battery is very heavy. Each weighs 500gms+(but again niMH batteries are heavy) If the weight of the battery is not a problem for you then you can go for it,u won't be dissapointed. If you want battery with much less weight then u should go for lipo batteries. Review: Excellent battery charger set - Excellent battery charger set...have had it for a couple of months and use regularly with zero issues....I use it on a Tamiya Wild Willy Jeep with a brushless 3500kv motor in it and get 45-60 mins runtime with the batteries depending on the driving...Highly recommend and budget friendly setup to get you up and running!!!! Just plug in the battery to the charger and I use a rubber band for the temp wire wrapped around the battery for safety's sake and then plug into the wall...I believe if you start switching the amp button from 1-2 amp and disconnect and connect batteries when it's plugged in it could cause failure with the charger possibly, so common sense needs to be applied, this may be the issue for some with the posting of charger going out on their reviews...It's all how you use your equipment for longevity..