Pi Zero 2 W Case/Zero W Case, 7 in 1 Basic Starter Kit with 20Pin GPIO Header, OTG Cable, Switch Cable, HDMI Adapter and Screwdriver for Raspberry Pi Zero 2 W/Zero W (Black)

It fits and protect my raspberry Pi Zero. You screw the board on with provided screws, the top snaps on and off. Has all the accessories you need. Ports match the board.

Nice bundle that I bought to pair with a Pi Zero W I bought impulsively and realized I had none of the required accessories that would help me get it set up. The case is super simple, with little clips inside to open and close with some slight pressure. I like it for the money even though it probably wouldn't last tons of uses if you were opening and closing it a lot frequently. The accessories are also really nice and what sold me on this deal as I lost the micro hdmi to hdmi cable I had forever ago, and this adapter helps out alot. The power switch is awesome since it lets me use my own power brick and cable to extend to the device and then power on so I have just enough room to have it set up right behind my router. The heatsink is a nice touch to prolong the longevity of my device as I probably wouldn't have given it cooling otherwise, and the micro usb to usb is also super convenient and will probably be used on other devices as well now. OVERALL OPINION AND TL;DR If you are like me and didn't think before buying a Pi zero and now need accessories and or a case, this is a good value deal. You can easily set it up and rely on these to work for at least a while (they feel pretty good quality wise). Since this is amazon the shipping was top notch as well. Overall whole heartedly recommend this at the steal value it is.

Pros: - Case fits great compact - Clean smooth case - Good thickness of the plastic, not flimsy - I like that the GPIO pins are covered by default but have a pop-out section on the case if you want access to them. - You can still fit a typical heatsink on the chip - There is enough room inside the case to place a washer and screw through the two + one the one side of the case to use them as a way to mount flush against something. Cons: - The GPIO labels on the case are upside down. They are correct, but oriented incorrectly when the case is put together - it indicates pin1 should be on the opposite corner (they did label pin1 nicely with a square, but screwed up on orientation of their text/graphic. - No ability to mount a fan - relatively lacking on ventilation, although this might be a pro for you to mitigate potential shorts - would have preferred the + to be designed as a pop-out like the gpio cover, where I could choose whether or not to have them there. Overall - for the price it's great. I have two of them, one - as you can see in the picture is in my attic where heat is an issue. Ignoring the mess of wires, zip ties, cardboard fan contraption, etc - it works great. This picture was taken before I realized I could use those + as mounting holes and screw it down to the 2x4s and put a more permanent fan solution (3d printed) in place, but the top of the case remains off to allow for the ventilation it needs. The other case stays on my desk for prototyping, which would have been nice to have those pin labels be accurate instead of having to count them and cross-reference pinout.xyz all the time.

It's a basic enclosure, put on the Pi Zero, secure with 4 screws (you can get away without) then snap the top cover on. Quick and easy! That's all I need but it came with extras which if you need to connect keyboard/mouse and monitor. I setup as headless, just need micro USB power plug for phone charger for example.

This is a great little enclosure with a heat sink and a few other accessories. Highly recommended for Raspberry Pi Zero 2 W.

I just needed a simple case for my pi zero. This was among the cheapest available, and it came with headers, a heat sink, a USB adapter, a micro HDMI to HDMI adaptor, an on/off switch for your power supply. All I can say is wow... a great buy for the price you pay and I will buy another one every time I purchase a Pi Zero.

Nice aluminum case, acts as a heat sink so that no fan is needed. Supplied adapters and cables work well.

The price is right for this kit. However, I had issues with the otg cable randomly disconnecting. I ended up having to buy 2 more, as the first replacement I bought from a different vender had the same problem. So maybe my pi is just picky