AsiaHorse VE-HUB 2IN1 ARGB/PWM hub Used SATA Power Supply,9 Ports for Addressable RGB Lighting with 9 Port PWM (Black)

Great quality! Fast shipping and functions properly. Also if you pop off the plastic shell, there are RGB lights on the pcb. I don’t know why these would be hidden

Works as advertised with nice secure connections . All the port connectivity I needed and more good price to solve a minor problem of mother board having less headers than what I prefer for argb fans. I only have 3 headers on my motherboard and while I could have just daisy chained to work with 9 fans plus argb you support bracket I don’t like to risk the headers being over loaded . Just picky like that . Completely compatible with my thermalright fans and aio . Seems well built and should be plenty durable

Works so well and easy, mainly got it for signalRBG and it works like a charm especially with my asiahorse fans

A good 5v hub for fans and led's. Note that it doesn't have a magnetized backside to just stick anywhere in your case which I didn't realize, but I had some magnet sticky strips and it did the job. Other than that I guess you can use the double sided tape they give you but you have to be certain about where you stick it. Magnets give you so much more flexibility with placement. So 4 stars for the lack of magnets, but other than that it works perfectly, no sketchy connection points at all, like some have alluded to, my led's and fans have been working without and loss of connectivity since day 1

Gave this a shot because I bought some fans from this company and they work great. First off before even opening product box the box itself looks worn, 1st red flag. Pulling the product out of its box the plastic housing was cracked, 2nd red flag. Installed the device correctly according to video and paper instructions that it came with. This is where the issues began, Fan port 1 (red port) worked which is connected to cpu fans, fan port 2 - 9 were dead. Tried everything and nothing worked, all the argb headers worked though. My guess is this was a manufacture defect, also inspecting the fan/argb in port you can see it doesn’t align with the housing. It feels like this was a refurbished item and not new like the sticker claims it to be. Also as of this time of writing this the manufacturers website is selling this hub for 8$ while amazon is selling it for 16$. Just seems like even the company knows this device is faulty.

Bought 4 of these, and this makes cable management and RGB setup so much easier than criss-crossing cables throughout your 'visible' space, trying to stack a dozen pins to only, say 4, headers. Great product.

Did not have the same tolerance issues others had. The top and bottom connectors were tight but had a definite click when bottomed out. The 4 pin headers slid in smooth but not too tight with my asiahorse cosmiq fans and my arctic slim fans. Argb headers also slid in smoothly and did not fall out. Not the tightest for ever but secure enough that no headers fell out during assembly. Velcro is a nice touch.

Once you get it to work, this product works as advertised. It connects your 3 pin RGB devices and 4 pin PWM fan power cords in one place which is useful if you only have a single addressable RGB header on your motherboard. It can even accept some daisy-chaining; I have four of the fans daisy-chained together and fed into one RGB port (those were power connected by MOLEX though in a separate configuration directly to the power supply, so you would probably need to actually connect the fans individually to the PWM ports for power). The tolerances are a bit tight on the PWM side and too loose on the RGB side. The worst tolerance though is the SATA connector. Plugging it in gives the peripherals power without any issue, but the data side where the RGB info is transferred just does not fit well with your standard SATA connection. It requires a LOT of force on the SATA connector in order for the hub to recognize the RGB. I would sometimes find that the connection would come loose and all the RGB disappears since that part of the SATA connection would no longer be recognized by the hub. Ultimately what made it work consistently was adding a large zip-tie shown (and tying it very tight) across the length of the hub to securely hold the SATA connector to the hub. It works great though with their RGB strips though, you could either daisy-chain them together or use a splitter to feed into the hub. My motherboard is an ASRock X570 Taichi and the hub is Polychrome Sync compatible, which is nice. Overall, I would recommend this once they fix some of the tolerance issues. Edit: After a month of use, I can't consistently get the RGB half of the SATA connector to stay connected, even using the zip-tie workaround. It would blink on and off at times, forcing me to fiddle with the SATA connection until it lights up again. Dropping a star as a result :( Edit 2 (2025): It's been a few years since the last edit. I did some cable management but found another issue when doing so... the male pins on the RGB side are extraordinarily flimsy and break off when slightly bent. Ended up losing two ports this way. I really want to like this product as its fairly inexpensive for the amount of utility you can get from it, but these build issues make it difficult to like.

Good

Cool design even though I will through it in the back

Buen producto, llegó rápido muy fácil de instalar,buena calidad

ファン分岐、ARGB分岐問題なし。 MSIマザーで使用。一括制御できています。 質感もよく、満足です。

Do not buy this garbage fried as soon as I plugged it I either there's no standard when it comes to argb 5v 3 pin means 5v 4pin is 12v I'm pluging 3pin into 3pin and they are burning out and melting the wires of the unit stuff all this Chinese garbage