ELEGOO 8K ABS-Like Resin 3.0, Photopolymer Resin UV Curing 405nm, Upgraded ABS 3D Printing Resin, Higher Precision, Lower Shrinkage 3D Resin for LCD/MSLA/DLP 3D Printer, Red Clay 1000G

Good stuff! It's not as break-proof as some other ABS-like I've used, but the details are awesome and failures few and far between.

I got the White, and there's no streaks or visible separation if it sits in the vat for days. It looks the same. It's kinda thick, so the extra doesn't quickly drain from the hanging build plate. Minor inconvenience if you're in a hurry. It washes off fine in an ultrasonic cleaner using water, with a bit dish detergent and some bartender's friend cleanser. That stuff has oxalic acid which seems to help a lot. Post curing under UV for a long time yellows it a bit... These ABS-like resins are a great improvement. I don't know how they make it, or if the qualities decline over time, but it's easy to print with, it's hard and it's strong. Thin sections are springy. Thick is rock hard. I printed a mold, and then had to break off parts of the mold without destroying the molded (epoxy) part inside (no parting compound required). Forget about cracking it open... It resisted the heat of a soldering iron. It doesn't melt but at some point, perhaps around 600F, an internal bond weakens, bits can be scraped away, and then you might break chunks off of it. Since it resists heat, I made some electrical soldering jigs from it. They hold wires in position while I solder them together. It can withstand a lot of heat. No other filament or resin that I have can do this...

Love this resin compared to standard UV resin. Be sure to calibrate the resin 'first' to your printer using 'Cones of Calibration' prior to printing out your prints. Once successfully calibrated, this will eliminate fails and ensure you get top notch prints. Great resin for the price. Will continue to purchase so long as Elegoo doesn't jack up the price. Kind regards.

The resin is great but the smell is much stronger than other resins. Even with ventilation and closed door I smell it in another room.

I have three printers and do a lot of printing, and I use Elegoo for most of my needs. I really like their ABS-like resin for things such as small weapons, belts, and cables—pieces that would normally break when removing supports. The resin is always very smooth, cleans up easily, and I hardly ever have failures. When I do, it’s usually because I set up my supports incorrectly. This resin delivers great detail and cures very well.

This resin has been great with my Elegoo Mars, I have been using the water washable resin lately, and it is nothing compared the this ones quality, the water washable ones seem to print everything.... just worse.. any small parts or the side that is flat on the build plate, always just ends up printing flat, or intricate details just turn into a smooth surface never making the space, even for like a micro SD card holder which I've made plenty of times with this resin, with no problems(long as you clean and cure it very well) but with the water washable stuff, it doesn't even make the space for the slots to be cleaned and cured... just a smooth surface like it was never apart of the sliced models...

Good product and good price

Buen producto

Me gusta mucho esta resina, el color es excelente y me evita dar una capa de imprimante, basta con lijarla para atenuar el brillo y puedo pintar directo. Pintada con acrílico color siena tosatada y un pincel burdo fácilmente se puede lograr efecto madera. No es muy resistente a las caídas (es frágil) así que quizás no es tan adecuada para piezas de juegos de mesa o que requieran mayor grado de elasticidad al impacto, pero para piezas decorativas y artesanales el acabado es muy bonito.

Excelente resina la tonalidad es hermosa y profesional

Buena calidad, pues permite ver los detalles finos de mis figuras, excelente producto

No comprar esta resina traslúcida, no logre ninguna impresión exitosa y solo daño el fep de mi elegoo saturn.