CORSAIR 7000D Airflow Full-Tower ATX PC Case – High-Airflow Front Panel – Spacious Interior – Easy Cable Management – 3X 140mm AirGuide Fans with PWM Repeater Included – Black

This case is a GEM. I have built a few computers so far in my life, and I think this was the easiest case to build in yet. Though it is a Full-Tower case, so with all the real-estate, it better be easy! The case is Big, it weighs in at a whopping 49 Lbs. empty. However, with my whole build it easily tips the scale at 85-90 lbs. The pictures do not do this case justice, it is BIG, and has a large footprint. Standing at around 2.5 Feet tall, almost 2.5 feet long, and 10 inches wide, you need to make sure you have the space for this case! The chassis is made of thick gauge steel, and feels and looks durable. The metal panels are also thick, and quite hefty, requiring two hands to comfortably handle and maneuver. However the panels are easy to remove on both the sides, front, and top. The removable racks for fans is a very nice touch that made installing the Rad, and fans a breeze. I only used one tray for my LTS 3.5" HDD and the rest of my storage is done through NVMe SSD's. however if you plan on using all 6 trays you will have to be meticulous in cable management because it doesn't leave much room for extra cables let alone using 2.5" SATA drives, so I recommend getting a modular PSU for this case. If you fill your fan slots with corsair fans (I had 12 in total) the cable management bay is a tad bit on the cramped side for the size of the case, but it is workable if you have enough time and patience. I will list my build below to show what I have living comfortably in this tech mansion. The amount of cutouts for the cable routing is very nice in such a large case, there are a couple things I wish I'd done differently. If you like the RGB features like I do, I recommend spending the extra money on Corsair Link systems. It alone would cut the amount of cable routing by nearly 75% and you wont wind up with a rats nest of cables. The commander series of fans have short cables and required some ingenuity to route them to reach the Commander Core and Commander Core XT Modules for all the effects. (mine are still not in order and I spent the greater part of 8 hours on cable routing and management and I'm not 100% happy with where I wound up). However, I'm willing to admit that I went haywire with the RGB fans and went for the less expensive Non-LINK fans so it is mostly my fault. If corsair Were to supply or Offer a kit of a few extension cables for your front fans for the RGB and PWM cables this would work out just fine and It would have saved me a few hours of Cable Routing, however I am not attempting to say this is their fault by any means. Their cable management system provides 2 channels to route cables with Velcro straps to fasten the cables to the chassis. These Channels are small, however, and tend to give troubles for high end power hungry motherboards as their custom cables have the capacitors that eat precious room in these channels. Other than the options for cable management, this is a very nice looking, functional case that is built very well and seems to carry the expected Corsair quality. I 100% recommend this case if you are in the Market for a sleek Modern case to house your large components and give plenty of airflow to keep your expensive parts cool. My Build affectionately named Nightingale: - Corsair 7000D Airflow Black - ASUS ROG Crosshair X670E Hero - AMD Ryzen 9 7900x (AM5) - Corsair Dominator Titanium DDR5 32Gb x 2 - Sapphire Nitro+ AMD Radeon RX 7900 XTX Vapor-X - Corsair RM1000e Modular PSU w/ Corsair Pro Type 4 custom sleeved cable kit - Corsair H170i Elite XT LCD 420mm RGB Liquid CPU Cooler (Top Exhst) - 8 x CORSAIR iCUE SP120 RGB ELITE (4 x on the front panel & 4 x on the side panel) - 1 x CORSAIR iCUE SP140 RGB ELITE (rear Exhst) - Micron 3400 512 GB M.2 NVMe SSD - Crucial T700 2TB Gen5 NVMe M.2 SSD

it has a very robust material and a lot of space inside with tons of different options that i didnt get to discover them all yet after a week it has an insane amount of airflow and at the same time you cant hear anything that comes from the PC ive installed 14 noctua fans and the case is around 60cm away from me and i cant hear anything from it I compared this to my older case (H500P mesh) the difference on noise and temps is too much on my opinion theres few advices that id like corsair to add or change into this case: add a bit more of room for a 4th 120mm fan at the top of the case, the front and side panel can have 4 but not the top and this could make it "match" the whole case (this may make the case overall length bigger so i understand they didnt made it for 4 120mm fans) add a support for the GPU on normal mount (im not sure if its needed for riser mounting) add a screw for the PSU and motherboard door,sometimes the cables need to be pressed a bit to fit and with a magnetic door that isnt possible, this is solved by just taking it off and using the side panel to close it but then this door loses its purpose this case still has more potential to become even better than it is right now and i hope corsair doesnt forget the full-tower designs because this one is GREAT note: you can connect the fan hub that comes with this case as long as the fans you want to install doesnt go over 12w without using the sata connector, if you do you must connect the sata connector (check how much power each of your fans requires and add them all) this is a rule in general for all fan connectors except for some premium motherboards that allow more w in one or two connectors but the rest will still support only 12w note2: if you want to install a 6 fans radiator on the front you have to change the direction of the rails or whatever it is called for it to fit, i didnt try this for the top mount but it should be the same note3: i couldnt find a good position for the SSD's on the HDD's storage without bothering the fan at the bottom located at the side door, i think it was just me not doing a good cable management to fix it and i wasnt expecting it to happen so to anyone that wants to mount a 4th fan for the HDDs/SSDs be careful on the way you set the cables the only "bad" thing in this case is its weight, way too heavy but thats because of the good quality of the case, best way is to take off the side doors and then it will be a bit lighter to carry then put them back after if they make a better version of this it will be on my wish list for sure

Huge Case! I absolutely love it. I slapped a 360mm AIO fan on top, so much space. Case fans are super quiet, and the little holes for cable management is clutch. Glass panel is nice to look at your RGB's if you have it. GPU brackets are nice and tight, too. So much so, you might not need the brace to dodge GPU sag. Price tag is a bit steep, but I found it more than worth it. This is especially true with the newer GPU's being so huge.

This case is fantastic! There's so much room, airflow will never be a problem. If you are short on space, or have spatial restrictions, this is not the case for you. But if spatial restrictions is not a problem, save yourself the hassle of a frustrating build and get this case. Just for perspective, my last rig was built with the old, but wonderful, Antec LanBoy Air Tower. While that case, at the time, offered amazing customization options and unrivaled airflow, it just isn't big enough to comfortable fit the new line of gpus and higher end AIO cpu coolers. The Corsair 7000D goes all of this with PLENTY of room to spare. My build doesn't look cluttered and cramped. With excellent cable management options, I can keep the word tucked away and secured behind the back shroud, leaving only my components and rgb to be seen through the tempered glass side panel. This case has allowed me to build my cleanest, most beautiful build to date. Because of its size and girth, I do recommend buying a small rolling stand to set it on. This will get it off the floor and allow for better airflow, and also makes it easier to move the case around if you need to reach the rear ports, or just reposition the car in general. You don't have to buy an expensive rolling stand. Any budget friendly version will do just fine. Just make sure that the stand is adjustable, and can expand to comfortably meet the dimensions of this case.

Definitely a five star case! - Solid! This thing has heft! Even with the inner cover-of-cabling-shame removed, this thing is solid. - Room! This thing has so much room. You can put in all the radiators or all the fans or a little bit of both. - Reliable! I think that given the room and the heft it could probably be used as an impromptu bomb shelter a la Indiana Jones refrigerator style. This has been my favorite case ever to build in. It's just ... easy. Cables are truly manageable. The hinged sides are great. The ability to customize is beautiful. You can add so many drives or remove the bays entirely. Tons of options for cooling. Lots of room for airflow. I've been using it for a few weeks now and things stay cool. I will be adding more fans in to keep it even cooler but I'm waiting for replacements for the three 120mm that arrived as a single used hair tie instead of fans. So you can enjoy the bit of crazy RGB that is has for now in the photo. Any complaints I have are too minor to mention, in my opinion. While nothing may be perfect, this is close as it gets. I have it paired up with Corsair cooling, hosting and ASUS mainboard and GPU, and G.Skill RAM. When I get the rest of the fans and the second lighting controller installed, will add pics (if Amazon lets me edit like that?) As it is, it's going great and I can't wait to add those finishing touches and report back on changes in cooling and coolness. Honestly, this case *ahem* probably won't change your life in a three wolf moon shirt kind of way, but it may be your next true love. The only reason my wife isn't jealous is because I got her the 5000D. She now games with a smile and a glint in her eye that belies true joy and she might love her computer more than me. It's OK. I did this to myself.

I purchased this case to build a new top-of-the-line gaming system. The case is large, roomy, and sturdy, which what I wanted. I just find it too difficult to use smaller cases. Be warned, though, it is heavy. I went for the extra airflow of this model rather than RGB of the other models. Not a fan of RGB and have no need for it. Between air flow and RGB, the air flow wins for me. The case is large enough to handle the largest GPU's and CPU coolers with space for about anything you need to add. Top panel connections is a plus. In case anyone wonders, the "ARCTIC Liquid Freezer II 420 AIO Water Cooler" fits just fine, so anything as large as that cooler (which is pretty large) should work. I wanted a powerful AIO cooler and needed the room for a large one. The case price is on the high side, but you get plenty of value and better value than the cases twice the cost. Been running my system for several weeks now and no complaints for the case. Airflow is exceptional and all my components are staying cool. I recommend the case.

Got this in June 2023, but it took a couple of months to get the build squared away. Package arrived safe and sound, and was very well packaged with plenty of crumple room to protect the tempered glass (as one would expect with a Corsair product). Top-front I/O cables, two 140mm front intake fans, rear 140mm exhaust fan, and sata powered fan controller were all pre-installed with cables nicely routed inside the back cabinet area. Hook and loop straps already in place and keeping everything tight and tidy. Both the front and back panels are pin-hinged and can be easily removed by loosening the screw on the top hinge and just lifting the panel up (when it's fully open). Inner cabinet in back also has an additional door, but your wiring will need to be very neat and flat if you expect that inner door to stay shut on its own (mag latch). Fortunately, the outer panel snaps into the case strong enough to keep it all contained. Case is quite large and rather heavy (roughly 50 lbs with glass panel installed), so that might be something to consider when placing it on a desk / table, or if planning on relocating the pc often. While the case can supposedly hold two 420mm rads plus an additional 360mm (or 480mm) rad in the motherboard tray area, I don't see how it could work without interference happening as the 360 spot is located near the front of the pc). Since the MB tray area needs to have both the fans and the rad completely inside the case, that will most certainly hit a front mounted rad (480/420/360 that's also inside the case). I just went with a top mounted 420mm rad, a 360mm rad in MB tray, and used the front area for fans. Easy and plenty of room for related hardware. An alternative would be a top 420, a front 420 (or 480) and use the MB tray spot for 3 or 4 120mm fans. Side-by-side sata racks inside the power supply shroud (configuration as shipped) would make for a tight spot to work in, but as I'm not spinning rust, removing a single thumb screw on each rack allowed me to just delete them from the build altogether. It's possible to put them in bottom front area, so there's several config options available. There are also 5 SSD spots (two rear cabinet area, three on top of p/s shroud) for even more storage if needed. There's two different plastic shrouds for dealing with the area in front of the power supply shroud, but they're kind of fiddly to deal with and decidedly an area that I feel quality of materials is lacking. I just deleted them as they're non-critical. Still putting finishing touches on build, but overall I'd say this is one of the easiest cases I've worked in over the last 20 years or so. If you're doing a lot of tear-downs and generally moving the case around a lot, the weight does get to be noticable (aluminum cases are almost worth the extra coin when you're flipping it around a lot), but overall this is a solid case at a reasonable price. Hard to fault it really, just remember to lift with your knees.

One thing right off the bat, this case is massive and heavy. It's all steel and has a multitude of options in configuration. Routing cables is easily done. You can change the overall setup to just about any way you want. There are many places for Disks, both traditional HD and SSDs. I ended up removing much of the inside partition materials due to the massive RTX 4080 graphics card. This case has an integrated fan system that only requires 1 feed from the motherboard, but I removed it and ran all the fans separately to the motherboard. I got more control over each fan that way. Just a personal preference. The case has features that support water cooling. There isn't a connection to indicate HDs like some cases do. The case is very easy to configure for just about any contingency. IT has a very pleasing look and one of the doors is smoked glass to see what's inside in case you support LED color stuff. In general, this is an outstanding case, but should be considered by advanced builders.