Mejiao Bumper Clips Pink 12PC Bumper Quick Release Universal Bumper Holders for Cars it Can be Applied to Front and Rear Bumpers,Trunks,Fenders,Hatches,Hoods,Etc.

They look nice and do it’s work. I bought them to help me hold my front bumper and so far, after couple of weeks they still holding in place. They also look nice and were easy to install. Definitely worth the price.

Works like a gem. This was easy to install, but I needed a drill.

Muy útil y práctico

Comes with all of the hardware to Install. The rear nuts are 10mm sized sockets. The bolts themselves are not all that long. Require a hex, Allen key, to help tighten. The nuts are the metal with plastic retainer so no lock tite is needed. It does not come with instructions but simple enough. 1) Decided where you wish to place the hardware. 2) Measure on the inside of both parts of your fender, make sure you have room for the instal and bolts are long enough. If not your going to have to remove part of the bumper and any Plastic wheel we'll linings (consult google or vehicle owners manual if unsure how) 3) Mark the drill points using the empty middle of the rubber band holder( The colored hardware piece) 4) Insert the bolt through the colored hardware and screw into the hole on the fender/bumper. 5) Place the washer onto the back side of the bolt the inside portion of the fender. Aftwards screw on the nut. 6) use a 10mm socket and a hex to hold the bolt from the other side. Then tighten the nut. 7) Complete the other side. To measure quickly for tension, Place the rubber band on the mounted portion and the unmounted stretch to desired tention and mark the point with the center of the colored piece that has not been mounted. 8) Place the rubber band over both colored pieces and check for movement and tension. Will update for life span of the rubber pieces but that seems to be the week point of this setup. The kit does give you many of these pieces however.

Es muy bueno y recomendado

Hey guys just got mine may, 12, 2025 it works as long as u get all the correct parts . I got extra rubber rings but no extra anything else, so if u mess up and/or lose anything it’s over with. INTRUCTIONS…… There is none but it’s self explanatory You have to make a whole in your bumpers to fit the screw through, make sure it’s the right size and not too big. Than you put the screw through the black round thingy That they call bumper fastener or whatever color you ended up getting, and than you put both of them through the whole you made. Than you take the big metal ring that they call washer and put it from the other side together with the small Nut. You have to do all that 4 times If you still confuse look at the pictures so you can know what’s what and check YouTube videos. Ps. You should know you will have to drill holes into your bumper with some type of drill and make sure your able to reach under the bumper to put the nut in from the other side it’s not as easy as it looks but if I could do it u can too.

Work good but breaks easy in the summer time no good in AZ summer weather.

They were great