Valve Stem Extenders,4Pcs 7Inch/180mm Dual Flexible Stainless Steel Braided Valve Stem Extensions,6Pieces 45 90 135 Degree Brass Valve Adaptors for Car Truck Motorhome Trailer RV Trailer Vehicle

I purchased the flexible valve stem extender for my truck and I have to say that I am extremely happy with my purchase. The extender is made of a high-quality, flexible material that easily conforms to the shape of my tire, making it easy to attach and fill tire with air. One of the things I love most about this product is how convenient it is to use. I no longer have to struggle to reach the valve stem on my tires when I need to add air or check the pressure. The extender extends the valve stem by several inches, making it much more accessible. In addition to being convenient, the flexible valve stem extender is also very durable. It has held up well and has shown no signs of wear and tear. I have no doubt that it will continue to function properly for a long time to come. Overall, I would highly recommend the flexible valve stem extender to anyone who has trouble accessing their tire valve stems. It is a simple, yet effective solution that makes it much easier to maintain the proper tire pressure on your vehicle.

Nice set of valve extensions. I used these on my 1-ton diesel dually. I have stainless steel wheel simulators and they made it tougher to get to the valve stems, but it was doable with some effort. I recently bought new tires and installed 2” wheel spacers, front and rear. I used the 12” hoses directly from the inside valve stem to the hand hole in my simulator. I used the clamp to attach it to my simulator. I also used the 135 degree extension on the outside wheel. This gave me excellent access through the simulator. Now I can easily get to all of my valve stems. 👍 Thus far, no leaks and I can keep a close eye on them via my TPMS. I highly recommend this kit. It’s competitively priced and well made. 😄

These work very well, apart from one issue I found. The provided clips, installed as shown in the manufacturer picture (picture #1), will rub against the valve body, eventually rubbing through the metal and causing a leak (picture #2). I like these enough that I bought a second set and this time I'm using a piece of rubber hose to isolate the valve body from the clip (picture #3). They'd be 5 stars apart from this issue, and hopefully if you're reading this you can avoid the problem altogether. They are easy to install, seal.well, and the metal-clad hose seems to be very high quality.

Well made, working great. Plenty of reach.

I have an ambulance that I'm renovating into a camper. I could not put air into any of the tires because of the way the wheels are configured on a tandem axle. The front tires could not be accessed either. This product required some thought to install but once they were attached, no more worries about low tire pressure. I highly recommend this product.

Good quality product but, NO INSTRUCTIONS or WARNINGS for installation. I installed 2 sets on each side for my Dodge RAM Dually. The clamps to hold the valve stem extension from the inner tire, to the outer tire rim, making it easy to check/inflat didn't stay attached. I drove down the road for a test drive. When I got back, both inner tires were flat. The valve stem extension for both inner tires came loose from the bracket and slung off taking the valve stem on the rim. Did some damage to my wheel wells on both sides. I had to order another set of extensions and replace the valve stems on the inner tire rims. My suggestions: 1. Redesign the brackets to safely secure the valve extension to the outer tire rim. 2. Or, include zip ties to attach the Valve extension to their bracket on the outer wheel rim, securing the extension so it doesn't come lose and do damage. 3. A short instruction booklet/sheet of paper with a diagram showing how to safely install and secure with a zip tie for each valve stem extension would not be very expensive. 4. I highly recommend using BLUE LOCTITE when installing to valve stem. The BLUE is removable, and it seals to prevent air from leaking. DON'T USE THE RED LOCTITE!!!!! You won't get it off without cutting the stem. I am very grateful I did not have a heavy trailer hooked up with a heavy load and have this happen. Just my thoughts, D² Out

Nice set of replacement extension parts. Function as advertised.

put these on a 2012 Harley ultra with a 21" front wheel made checking the air pressure so much easier and they seem to hold air good just mage sure to tighten them down on the stem real good but so far no leaks

Good quality and easy to use!