Jewelry and Bead Instant Adhesive Transparent,B-7000 Jewelry Glue for Metal and Stone, Multi-Function Glues Paste Adhesive Suitable for Glass,Wooden, Jewelery, 0.5 oz, 2 Packs

Excellant. Did the job easily. Thankyou Watch strap diamanties.

This glue is so good I ordered again. I even use it for sticking down parchment for my card making. It has a fine metal point that keep the glue from getting stuck up.

Sticks well but make sure not to use on cotton fabric as stains the fabric and not the easiest to get out the smell is strong and the quality is okay and it’s really strong I used it to bedazzle joggers

great little glue - and very strong

I bought this glue because I accidentally pulled the post off one of my new earrings, when I was unpacking them. The first application didn't take to well ,but that's because I didn't hold it in place for long enough. The second application went very well, because I held the post in place for longer and now the earring is mended. I'm very happy with the adhesive's performance.

Very strong glue, have used this on a couple things and hasn't failed me so happy with how strong it is. I pressed down for a few seconds before and left it a few hours and jobs done!! 🙌

Performed better than expected. Had a couple of bits of earrings and jewellery that were broken, so thought I would give this a whirl before having to throw them away, it worked a treat!! The glue is clear and so is not seen when dry....bonded within a couple of minutes and was very sturdy after 24 hours. The glue tube has an extremely fine metal nozzle- like a needle- so this was greta for accurate placing of the glue and not using too much.

Did an ok job but fell out after a week

The Viomis Jewelry and Bead Instant Adhesive is an excellent glue for many craft projects.. It is clear, thick and a little tacky when it is fresh from the tube. The cap has a small metal pin that prevents the tip from clogging. I use it as an applicator- see pictures. Since it is thick and tacky it can be applied with precision and it sticks instantly. However, it does allow for a minute or so of working time so objects can be positioned. It dries clear. As a model builder, I found this to be an excellent alternative, in certain situations to cyanoacrylates (super glue) or clear craft glues. IT has instant tack and can be precisely applied and is more flexible and forgiving than cyanoacrylates. It is also acrylic making it easier to clean. I just had to rub/scrape a little with a toothpick. I used it to glue scratch built harness straps on a model airplane ejection seat. It is far stronger than white craft glue and I could apply it with much better control. I have not tried it on clear plastic parts yet. For my project today this was an ideal glue. It should work well on photo etched parts as well. It does have an odor. I did not find it to be strong, but good ventilation helps. Also, don not squeeze the tube. I learned this lesson the hard way several years ago. This type of glue just oozes out of the tube when the cap is removed. Since I use it in small amounts, I have a bigger problem with it drying to fast. If the tube is pressed too hard it will waste a lot of glue. If glue dries on the end of the tube or applicator I clean it off with my fingers. This is a nice option to have and will improve my model building.

First of all, this is a slow setting glue so don't expect instant result like I did initially. So I was trying to patch up my office chair with some faux leather patch as shown in the attached pictures. Initally, I applied only a small amount to test the area, being impatient that I am, I tried to pull off the patch and it came right off. I went back and read the instruction and more detail on the product page and realised that this is a slow setting glue not like the regular super glue. So I went back and added more glue to the patch on both sides, place them together and pressed for a few seconds to allow the glue to bond, did some placement adjustment as well and then let it set for 24 hours, the result was a lot better than my first attempt. the Faux leather patch stuck onto my office chair really well and strong too. No smearing, cloudy or White effect around the test area at all. Also, it's easy to clean off the excess glue after it's dried. I also, tested this glue on some small jewelry repairs and it works great too. Overall, this glue is great to have around the house or office for small DIY repairs or crafting. Will not stick to skin or hands like the regular super glue, fully transparent and it will give you more than enough time to make adjustment or placement before drying or setting. I am keeping these to use on glass or wherever regular super glue can not be used.

Sehr gut zu dosieren mit der Stahlhohlnadel .

So, I recently got my hands on this four-pack of glue tubes, and I've got a few thoughts. First, don't be fooled by the size of these tubes—they may look small, but they pack a punch. You really only need a bit for it to work effectively. But what sets this glue apart, in my opinion, is the precision tip on the tubes. I've used a lot of so-called "extra-strength" glues before, and let's just say, precision wasn't their strong suit. This one, though? It lets you apply the adhesive exactly where you need it, which is a big deal for me. Now, one word of caution: the smell is rather potent. You're going to want to use this in a well-ventilated space—trust me on that one. Also, patience is key when it comes to drying. Depending on your project, you might want to let this stuff cure overnight. Heck, you could even put something heavy, like a book, on top of the glued area to make sure it really adheres well. So there you have it—small tubes, but high impact, with the precision tip being the real MVP. Just remember to use it in a well-ventilated area and give it time to set.

Good hold, great for crafting. I've found just having it on hand is great, best reason for a multipack. I've used it on wood as well as plastic. The tip allows for precise application for smaller projects.