Rubio Monocoat Wood Oil Finish 52 m² - Black | Oil Plus 2C | Quick-Dry, Eco-Friendly Linseed Wood Oil for Indoor Use, Includes Accelerator (Part B) | Protector | 1,3L

Provides a great finish, used on chopping board and looks great even after 6+ months. Dries is around 24 hours. Easy to use, just make sure you read the label/ online guidance for splitting ratios. Slightly expensive, but great stuff!

Saw on blacktail studio video and thought I’d give it a try. Absolutely perfect application and was easy to prepare, results were great. This was the pure version

Good oil, easy to apply and I'm happy with the finish. Worth noting, this colour is not a paint, but an oil. It simply tints the natural colour of your wood. I was able to increase the strength by applying a slightly thicker layer, leaving overnight and rubbing off the excess before applying the cure

Very lovely finish - the Natural colour is very subtle, but the protection has been great. I used it for a large white oak step that gets heavy, daily use and even 3 months on it looks brand new. Ive had the same results on picture frames and furniture. Very impressed - this’ll be my go-to finish for most projects moving forward, but might explore the range of colours to add variety and achieve a deeper look if needed. I’ve only applied to oak so far, so can’t comment on other woods.

Fantastic finish even in inexpert hands. Problem is it's so blooming expensive - hence the deduction of 1 star. I have used it mostly on Oak Veneered sheets. Personally I think the 'monocoat' claim is a little optimistic, I have found 2 coats is best.

Good product , does the job

Used for two guitar necks so far. One on a maple neck sanded to 400 grit and a maple with rosewood fretboard(left bare) sanded to 400 grit, coated and sanded to 1200, then recoated. The former has that natural timber feel, which I really like (I have two other bare neck guitars in Solid wenge and solid rosewood), the later has a really smooth, glass like satin finish. Really easy and simple to use. Don't need the accelerator unless you need the neck fully cured in a day. I was able to fit tuners and bolt neck on and string up after 24 hours. Soooooooo easy to apply and such a great finish 👍

If you are a Blacktail Studio follower, you know what you are buying. This stuff produces extremely hard-wearing protection layers on hardwoods. My home's stairs - after three years of hard, daily use - still look beautiful. The trick of the trade is to use TINY amount of it and work it well using a soft sponge pad (open or closed pores) on RO. Meticulous prep (sanding, water pop, blowing the dust, etc) is a key to achieve fantastic results.

Die Anwendung ist lächerlich einfach und gut beschrieben. Habe bisher nur reinem gekochtem Leinöl, teilweise mit Tung-Öl gemischt, gearbeitet. Da muss man ständig aufpassen, dass das Holz beim Aushärten nicht schwitzt und die Einreibrichtung stimmt, damit es keine Schlieren gibt. Hier: Wild mit kleinem Tuch oder Spachtel verteilen, nochmal kurz kreuz und quer nachreiben. Holz ist sofort gesättigt, schwitzt nicht und zeigt keinerlei Schlieren. Habe sicherheitshalber natürlich dennoch in Faserrichtung nach dem ersten Einreiben und beim Abtrocknen des Überschusses 30min gearbeitet. Das war aber wie es aussah übertrieben. Stinkt auch nicht, keinerlei Lösungsmitteldämpfe. Ein Teufelszeug, was jedoch auch seinen Preis hat. Ich hatte die 130ml Packung und bei einem Schliff von 120-180 kommen die 5m² Ergiebigkeit locker hin (Walnussholz).

Grosse déception ! Laisse une épaisse couche "collante" malgré séchage et très fragile car s'enlève au moindre frottement !! Donne un aspect brillant / laqué au bois alors qu'il s'agit de la variante "pure"

El tamaño real del frasco es como un pintauñas, aunque en la foto parezca mayor. Demasiado caro para la poquísima cantidad que contiene.

Easy to apply and clean off on finished wood. Bring out the wood grains.

Top qualité. Le résultat est à la hauteur de mes attentes