VIVO Dual Monitor up to 32 inches and 19.8 lbs per Screen, Mechanical Arm Desk Mount, Articulating Counterbalance, VESA Stand, Classic, White STAND-V002OW

Freed up my desk completely. First impressions are good. Assembly is straightforward enough, the instructions could be clearer but if your use to these kinda things (Ikea type instructions), it shouldn’t be too hard to setup. You can mount the arm to a desk via drilling however, I’ve stuck with the included clamp. Giving it a shake or two, you can tell it’s not going anywhere. Quality wise, the mount is very sturdy, definitely well built. I went for gas spring because the level of flexibility they offer is second to none. Being able to raise / lower, swivel and tilt such a big monitor effortlessly (mine’s 27’) is a real game changer. You can adjust the arms flex-rigidity with a single H5 which is handy. I would say use your own tools when assembling. The allen key’s included are okay but if it’s gunna mount your monitor, you shouldn’t cut corners. If I had one con, I would say it’s not the best for holding bigger monitors while fully extended. It will shake for a few seconds after adjustment but secures itself pretty quickly. Still, this doesn’t take away from the greatness of the product. It’s early days but overall happy so far! I plan on adding a second mounted monitor to my setup but wanted to get an ideal of how it’ll look first. For less than £40, this mount is excellent value for money, you really can’t go wrong.

Great product really helped me with improving my set up and holds my G5 odyssey up perfectly. Excuse the cable management need to buy some zip ties but its a great product for the price

Well packaged product. Instructions are easy to follow. Easy to install I used the desk clamp not sure why anyone would want to drill their desk with so many variations of monitor arms out there. Anyway the product is very sturdy for my 24” monitor. I am awaiting delivery of a 27” so cant comment on that for now. The closest the monitor can het to the wall is around 80mm but for a height adjustable desk this will need to be increased to around 100mm. The cable management system is tight. Where cables leave the monitor you need to then bend them 90 degrees to enter the cable management which is a bit daft. The too section of the cable management is flimsy see my photograph i reckon if you need to remove it more than a couple of times the clips will break. The entry points are also sharp and shred the cables. The bottom part of the cable management is just as tight and hacks away at cables. To sum up the product i like the bracket just the cable management lets it down. I will keep the item though as there are probably worse out there for the money so I suppose u just have to weigh it up.

I can't believe how underrated this monitor arm is! It completely transformed my setup, making it look 10x better. Not only does it have a sleek design, but it's also incredibly sturdy. My monitor feels secure and stable, and the adjustable arm lets me position it perfectly. It’s a total game changer for both aesthetics and functionality. Definitely recommend it if you’re looking to elevate your gaming setup or workspace. This is hands down one of the best additions I've made to my setup!

Great and easy to mount nice adjustments wish it had some kind of level come with it for the tilt

Don’t usually leave reviews but this monitor arm deserved one, extremely sturdy and flexible especially for the price point. Using with a 32 inch curved monitor with no issues.

Been using this a long time. Well worth I’ve 2 x 23 inch monitors on it it’s great! Good value for money!

Sturdy and well made id recommended being slightly careful with the cable management sleeves as they do flex a little and might snap but they get the job done

i got these to support 2, 27" monitors on my desk. i had difficulty mounting these using the clamps. the screw for the clamps needs about 8" clearance to mount it, so if the part of your desk has another shelf below it, you wont be able to fit this on with the clamp screw. the other issue i had is that other edges of my desk have support bars running under them, close to the sides, which are far more narrow than the clamps for this, and the clamp was unable to operate on them, as the weight of the monitors twisted the clamps off the narrow metal bar. i was forced to mount these by drilling a hole in the desk, and that worked well. the pin screw for hole mounting doesnt require as much space to fit as the clamp. the mounted stand arm is very sturdy once installed. everything you need to mount these is in the box, allen keys, etc. unless you need to drill holes. these easily manage the weight of my 27" monitors with a little adjustment. they are a little stiff to move and position, but its different by unit, i find one of my stands a bit stiffer than the other. while they have a lot of placement options, there are some positions that you cant move these, due to the arm being made of 2 solid, straight parts. so keep that in mind when youre mounting them, especially if youre drilling holes. i found it helpful to mount one of these with the monitor attached using the clamp arm, and practice moving it around to see how the arm would bend moving it in anticipated positions to be sure the arm wouldnt hit the wall or interfere with the other arm. i found this useful as if you mount this directly where the monitor stand used to be, the monitor will be about 6-7" in front of that, which may be too in your face. i found it was best to mount this 6" to the side, because if you want the monitor to be able to be pushed back as far as the stand is mounted, the way the arm needs to bend puts it off to the side. this has cable management routing on the arm too, but make sure that your cables have lots of slack. the way this mount arm twists and turns eats up a lot of cable length. my monitor has many inputs and after the power, audio and display port cables, im not sure i could fit another HDMI cable through it for an alternate source, which is one of the reasons i bought these monitors, but ill make it work somehow.

I'll start with the main stuff - it works, it's pretty, the cable management is good, the motion is smooth, and it doesn't sag with my 27" Asus monitor. Well, mostly. 2 problems - angling it upwards doesn't really hold that well, and the most annoying thing - you can lock the level of the monitor. It sounds like a non issue, but it is - every time you want to move the screen you will almost inevitably ruin the level of the screen, since rotation is so sensitive. For the price it's still a good offer, but inability to really lock in rotation for me kind of ruins experience.

1) Impossible de faire pivoter les écrans à la verticale. 2) Si le serrage du pivot d'écran est sécuritaire, le mouvement verticale (pivot de bas en haut) se bloque et l'écran reste dans la position définitivement , donc si vous l'avez monté et qu'il pique du nez , c'est foutu pour toujours. 3) la couleur blanche est plutôt couleur vanille, à la rigueur, çe point est le moins gênant. 4) les ranges cables intégrés sont périmés/obsolètes. Impossible de passer les fils des port DB ,on ne peut faire passer que de l'USB .. super nul pour des câbles d'écrans larges....

Dont buy this as this does not support your 27 inch monitor as it fall down.

Yo tengo dos monitores de 24 pulgadas y los aguanta perfecto. 1.- Para atornillarlo en la mesa tienes dos medidas y viene bastante amplio aunque si tienes una mesa delgada no te lo recomiendo mucho porque por el peso se puede llegar a pandear y maybe se rompa la mesa, 2.- Debes considerar el espacio que tienes entre la mesa y la pared porque afecta mucho en la movilidad de los brazos y si no tienen espacio no podrás mover los monitores. 3.- No es difícil de armar si te llegas a confundir puedes buscar algún video en YouTube. 4.- Tiene forma de esconder cables para que se vea más limpio. 5.- Puedes mover los monitores de arriba a abajo y no sé si puedes cambiar el monitor a manera vertical (no lo he probado) 6.- Tienes que ajustar las resistencia para poder mover los brazos y es muy fácil, igual puedes buscar un video en YouTube o TT si se complica un poco. Por el momento ya que lo acabo de instalar hoy, no le encuentro ninguna falla y se me hace increíble. Lo volvería a comprar y así. Gracias por leerme :3