3D Printer Enclosure for Bambu Lab A1 mini, Large Transparent Window Enclosure with LED Light, Fireproof Dustproof Noise Reduction Constant Temperature 3D Printer Cover, 460x460x550MM

Man, this is a solid third party home for a Bambu. The TOPCUBE enclosure looks clean on a desk, keeps dust off the rails, and gives the printer a steadier environment so parts come out with fewer random curls and layer splits. The acrylic stays clear, the seams meet well, and the door action feels confident rather than flimsy. It makes the whole setup look finished rather than improvised. 🙂 Heat management is the big win. By trapping warmth you get a gentler climate around the print which calms ABS and ASA and helps PETG keep edges tight. Warping and draft scars drop because the air is not slapping the part every time your HVAC kicks on. For PLA you can crack the door a touch so it stays crisp and glossy. The net effect is fewer restarts and a higher keep rate on tricky shapes. 🙂 Noise comes down from a room filling whirr to a background hum. You still hear fast moves and fans, but it blends into the room in a way that is easier to live with if you print near where you work or sleep. Odor is easier to manage too. The enclosure gives you a defined place to mount a small carbon pad or route a hose to a window if you want extra venting for materials with stronger smell. 🙂 The daily use details are thoughtful. There is room to position spools where the path stays smooth, pass a cable through without pinching it, and open the lid to get at the toolhead without feeling boxed in. Bed scraping and nozzle swaps do not turn into a wrestling match. If you run multi color, just keep the filament angles gentle and give yourself a little slack loop so the path stays happy. 🙂 Assembly is straightforward if you lay the panels out, square the frame as you go, and snug fasteners gradually. Wipe the panels before you peel the film so you avoid static dust, and finish by checking door alignment so magnets meet cleanly. Put a small thermometer inside for the first week so you get a feel for how warm your room and materials like to run. 🙂 Safety and common sense still rule. Do not block fan intakes, leave space behind for airflow, and avoid draping fabric over the enclosure. A compact smoke alarm in the room and a small ABC extinguisher nearby are smart additions for any printer, enclosure or not. Printing unattended is never truly hands off, so use your camera or pause jobs if you will be away for long stretches. 🙂 Bottom line. If you want steadier temperatures, fewer warps on engineering plastics, quieter operation, and a cleaner look for your Bambu, the TOPCUBE enclosure delivers that package without drama. It turns a fast printer into a polite roommate and opens the door to materials that are fussy in open air. 🙂❤️

Was really quick to set up! Took about 5 minutes. The quality is pretty good, the supports seem strong and the tent fabric does NOT feel cheap and feels like it’ll last, same goes for the zipper. There is a slight smell that the fabric had, but I assume that’ll go away with time. Easily fits with my Bambu Lab A1. My only concern is the air flow, but I think there is some DIY solutions out there.

its a decent enclosure for the price. I double checked measurements before ordering, and find that it is also a good fit for a Prusa Mini+ with just enough room inside for the spool as well. (I couldn't find almost anything else with dimensions even close.. most were way too tall). So far I can't say that it reduces noise, but should help maintain temperature and capture some fumes.

Update 10/19: The manufacturer has sent me a replacement led light. The one sized for the normal A1 actually encloses the A1 mini and the AMS lite unit pretty well if you put it on its side. It keeps the PLA smell in and somewhat reduces the whining from the fans. The fabric is nice and thick feeling but the plastic fittings for the fiberglass rods were loose and kept falling off when I was assembling it. The rods were also covered with fiberglass dust and it made my hands itchy. Definitely wear gloves when assembling this. It was missing the included LED light.

Fairly easy to set up. Plenty of room for the A1. Included LED light strip is a nice touch. Has 2 small openings to route cables in and out of the enclosure. An opening is included to vent the enclosure that is optional. Has a couple small pockets on one side to hold your printer tools. Be forewarned, it does have a somewhat strong smell to it that dissipates after a few days.

Great enclosure for those who don't want to breath in printer fumes! Does a good job at reducing the noise and keeps the enclosure a nice, even temperature. Also, love the cut out exhaust fan hole that allows me to vent it out of the enclosure and outside. Overall, very happy with the TOPCUBE 3D Printer Enclosure.

Great Product. Price was right and my Bambu Labs A1 mini fits perfectly. Temperature/Humidity is always perfect for prints, The LED light in the enclosure is a super bonus.. Best purchase I made after getting the printer.. Great product for 3d printers.. ( also seems to keep the odors from printing limited )

Despite saying it is explicitly for the BambuLabs A1 it isn’t the proper dimension for it as the rear clearance isn’t the threshold specified by manufacturer. As a result when the bed backs up the cable gets bent into the rear. This has been a known issue for BambuLabs printers in the past to cause fraying and eventually cable failure. Keeps heat pretty well contained. Although I wouldn’t go using this expecting a proper seal since you can see light through the zippers and it does have holes on the side if you don’t have the multi filament external feeder. It was good for the price and pretty sturdy for the frame… but I wouldn’t say cat proof since my cats jump on it every now and again and it bows in the top to the point it touches the top bar mounted filament wheel. Design needs work. If it didn’t say it was for this printer it would be better rating but I can’t in good conscience recommend this for A1 Printer. Assembly sucks but is meant to as it is a tight fit after you get all the metal bars in.

Works well but the positioning of the tubing was awkward. But having longer tubes and passing them "over the top" by leaving a part of the zip open actually reduced overall breakage for my Bambu A1 printer but the caveat is that the more resistance of longer tubes despite the sharper turns can have feed issues and be harder to push out. Using better filament saves the day, though. It is easy to use, but the poles are cheap and overly loose. I'd give four stars if they had better poles and hole placement. This was the only one that'd fit my printer. I think smell-wise with a ventilation hose out the window it works well. The colour options are ok, I got the black one. The movability is poor because of the poles being too loose though but the enclosure is flexible like a tent (not hard) and keeps the frame fairly together if you support the base by putting it on something and move that it should work relatively ok. I couldn't build the enclosure around it, I had to lift the printer into it.

Esta hermosa, queda super apretada y cuadrada tiene mucho espacio lo único que no me gustó es la ubicación de el tubo de escape no tengo espacio para acomodarla de el otro lado y eso le quito mucha estética el ducto pasa por encima de la funda pero supongo que no todo se puede y tampoco quise mutilarla por que asi perdería su originalidad y si quiero reubicarla o venderla

It is good

庫内温度は37度ぐらいまでしかあがりません。 ABS等印刷時には匂いが外にもれないのでそこはgood

Me gustó mucho, es realmente grande, si la recomiendo y espero sirva muchos años, ya no se va a llenar de polvo y voy a tratar de usar ABS, le puse un powerbank para la luz y todo muy bien.