ZENY Adjustable Drafting Table with Stool, Tilting Drawing Desk Artist Table with Storage Drawers, Art Craft Workstation for Home Office Reading, Writing, Crafting

Relatively easy to assemble, but it does take a while with all the parts. It needed two pairs of hands at different points, so just be aware of that. Otherwise, functionally, this desk is pretty ideal. There's a lip on the edge of the desk which can be positioned up or down, to prevent pens or brushes from rolling to their doom off of the edge of the table. Or, it can be lowered if the desk is laid flat and you have your wrists on the edge of the desk. There is a slideable side-board that can be pushed in if it isn't needed, extending the desk by another 15 or so inches. Storage on the right side is a pivoting wire mesh cup and a number of plastic cutouts for pretty much any hobby. Two drawers underneath add more storage space for flat items (paper, templates, miniature bases or glue tubes). All in all, while this won't win any awards for the best-built desk from quality materials - the design itself is solid, compact and really utilitarian and I couldn't quite find a craft desk which basically supports the five hobbies I am into currently and manages the resources for each in one desk.

I bought this for my wife to use for her diamond art projects. She loves it. I attached a magnifying light and cut an angled piece of 4"x4" post so she can keep her bead trays parallel to the floor while the table is tilted (line the bottom with hook-and-loop to attach it to the desk, and the top with a rubber pad so the tray(s) won't slide around). This desk was easy enough to assemble, and it is made well and should last a while. I installed caster wheels (instead of the included base plates) so she can easily roll the desk around as needed (we keep it in the living room, and she'll roll it to our couch to work on diamond art while watching TV). The stool... well... you'll likely want to use a different chair since that is not comfortable, so I use it in my workshop for convenience. We like that the table raises and lowers, though you'll likely want to set it where you want it and then leave it there since it's not really all that easy to adjust (don't plan on changing the height often). The drawers are nice, and the side compartments are handy, as well. Though the box arrived damaged (no surprise there), the contents were well packed, so no damage was done to any of the pieces. No complaints here; recommended purchase.

I put this table together myself. Had one hickey up and that was getting to write direction installing top to bottom. The adjustment is so smooth and goes a lot straighter than my old one. Looking for a reasonable priced professional table this is it. We'll worth the price.

I absolutely love the table. I would recommend a little more graphic detail to assembling instructions and a little more padding to the stool seat.

I absolutely love everything about this drafting table. The instruction manual is easy to follow— this was my first time building something myself too without any help! It took me about 1 and a half to 2 days to put it together and it is very very stable. I love how versatile it is with the little side table, pencil holder and other things. I do wish the paint holder(?) at the bottom were a little closer but it’s okay! I really like the gorgeous brown wood design of the table tops and the red labeling that made it even easier to follow the manual. I also appreciate the big screw that allows you to lower and lift the table and tighten it — this table turned my plant room to an art room and I live for it. My mom always tries to get me to come out when I’m there for long periods but I just love it!! I’m going to get one for my dad’s house next so I can work there as well.

This table/desk was very easy to assemble. I like that the height of the table is easily adjustable (by one person) by loosening the two knobs on the sides, then raising or lowering the entire top (including drawers). The good part is that when the knobs are loose, you do not have to support the weight of the table top; the top will stay put as you raise/lower it... so you can get it exactly where you want, then lock it in by tightening the screws. I find reviews are most valuable by pointing out the negatives, so here goes.... 1. The feet are cheap. While the feet are nice and big, and are easily adjustable, the plastic is rigid with sharp(ish) edges to all the molded surfaces at the bottom. I think they would scratch a lot of different types of flooring (vinyl, laminate, hardwood, etc). That said, I think putting some thick felt or something under the feet would eliminate that issue. 2. After putting the table together, I had two small screws leftover. They were not mentioned anywhere in the instructions. I knew it was no accident on my part, and, quickly discovered where they belong. They belong on the front and rear edges of the sliding side table. That side table slides between two metal holders. Each holder has an obvious slot. The screws go through each slot and into the table side to prevent it from being pulled all the way out (when extended) or crashing into the table top angle mechanism (when pushed all the way in). However, the table top does not have the holes to install the screws. I quickly drilled the two holes (as this type of MDF board may just crumble if not pre-drilled), then installed the screws. Mystery solved! And, the side table is now safe for me or my kids to use without worrying about it. 3. There is one VERY VERY small defect on my table top. Some kind of debris is between the MDF board and the laminate veneer, causing a tiny, little "pimple". It is on the lower-left of the table top. While it's barely visible, it's enough to redirect a pen/pencil stroke, if under a sheet of paper. Hopefully it's far enough to the left that it will never cause an issue. However, as that is the ONLY defect of that kind on any of the table top, bottom, or side surfaces of the main table or pull-out table, I would think this type of defect is rare and I just happened to get it. Overall, I would give this product a 4.5 star rating... so, I just rounded up.

The customer service is really professional and this drafting table is well worth the cost. It’s well built and I love it. I’m very happy with my purchase

this table is just straight up cheap quality and VERY OVERPRICED for what it offers with such quality, some screws dont even work with each other and the tools they provide for you to build it aren't enough and the screw knob hole broke on me and now it's just unusable. I don't usually give reviews to items i bought but this is trash and i just had to give it the review. just buy a desk from a local shop instead of amazon.

Amplio y funcional, facil de armar.

Purchased the desk for my wife's birthday. It was easy to assemble and well made. She loves it. Only issue was delivery. Box looked like it had been thrown down a flight of stairs over and over again. One minor dent and small scratch. Amazed that was all the damage when looking at the condition of the box.

Llegó golpeado y mal empacado

I personally like the table. The stool on the other hand, is crap as it wobbles - I got myself an actual chair.