GuliKit OLED Thumbsticks For Steam Deck, Electromagnetic Joysticks Replacement with Original Touch Sensing, No Soldering, One-Key Calibration (Not for LCD)-SD05

initially i bought and fitted the handdiy hall effect joysticks .. but for some reason they felt off .. when i replaced them with this i realised then oh boy were they off ... these are far far superior more accurate way easier too set zero point .. fantastic feeling and don't have the weird unwillingness is the only way i can say it im glad i swopped out for these .. brilliant buy

Easy to fit with phone repair toolkit. Unscrew the 8 screws. ( dont forget to remove the micro sd before removing the back as I found out it snapping when changing the NVMe card last time) 3 screws and the old pops out after removing the connector and cable. Put the new in slightly to the right and swing in as the top button switch is on the end of the pcb. Screw down and same for the other . Leave back off turn on and press buttons and recalibrate easy enough then screw back on and put card in . Its really that quick and easy. Centres better than oem and feels slightly more feedback on motion. Once calibrated and gyro reset the jitter goes and zero spot on. Will how long they last but so far, spot on.

Easy to install, zero deadzone, all around good product

Very solid, but calibrating is quite a painful experience as you have to press a tiny button on the back while booting the steam deck with the back open.

Context: I have repaired electronics in the past and have replaced a few shells for switch and PS4 controllers, as well as replacing the shell of my steam deck at the same time as installing these sticks. These upgrades were super easy to install, fairly non-intrusive, almost plug and play. Calibration is quick and painless in desktop mode, simply following ifixit tutorials made this mod a breeze. Highly recommend for any nerds like me who enjoy playing games on deck

Much better than the original sticks, easy to do but best not to go in without doing some research. Use the ifixit guide to dismantle and be careful probably won't be covered under warranty if you short something out

Great upgrade. These feel a bit stiffer than the analogue ones that came from factory. Calbration is a bit finicky though.

Easy to install with T7 bit. Button on the board didn't calibrate the stick very well so had to go into desktop mode and konsole thumbstick_cal This worked better and now zero deadspots and centres perfectly

ÓTIMO PRODUTO... RECOMENDO O VENDEDOR!!!

These are a great replacement for a busted joystick on a handheld gaming system. I bought a IFixIt kit to help with installing the joysticks and it was extremely easy to do and much cheaper than the company had quoted (albeit a scary experience for a first timer). So far I haven’t had any issues with the joystick and can barely tell the difference between the original joystick and these. The biggest thing is to pay attention to a good step by step instruction manual. Plugging in all the necessary cords is definitely necessary. It’s been a few months and the sticks are still in good condition. Overall I’m happy with my purchase and find the joysticks to be quite good. Overall it’s a good value for the price.

These joysticks are great! The price was very affordable. They were packed well and were in good condition when they arrived within the promised time frame. They were easy to install on my Steam Deck. I am very happy with them and highly recommend them.

Remplacement idéal des Joystick de base du SteamDeck OLED, en effet, la techno Hall garantie qu'il ne drifteront jamais. Le remplacement est relativement simple (il faut quand même démonter le Steamdeck, mais ça n'annule pas la garantie si vous faites attention en le faisant), pas de soudure à faire pour récupérer le fonctionnement capacitif du joystick puisqu'ils sont livrés avec leurs propre pad.

This was easy to install, I had a slight issue with the left thumbstick and the wire for the capacitive touch sensor. It was catching when I pushed the stick up. After adjusting the position of the wire it seems to have stopped this issue. I'd recommend following a video to help with installation and calibration. The calibration button on the back of the board worked but I got a far more accurate calibration by going through the Konsole. The sticks feel much nicer than stock, and I'm quite happy with the purchase.