Black Widow ダブルバイクヒッチキャリア 積載スロープ付き 耐荷重600ポンド メタリック - 高耐久アルミニウム運搬機とオートバイ用プラットフォーム

We have two RadWagon electric cargo bikes. They weigh in at nearly 90 pounds each and are simply too heavy for conventional bike racks. We tried a heavy duty Yakima rack that required lifting the bikes and positioning the supports through the frame. It was a nightmare, and required two people. Further, after a trip to the Canadian Rockies, we noticed that the rack was sagging considerably. I had to find a better solution. Enter the AMC-600. I realized that I needed a combination of lightweight and strong, so aluminum was the way to go. Assembly took just under an hour. I found an assembly video on YouTube that was very helpful save for one issue with where they suggested mounting the ramp. After putting it together and using it, I determined this had to be wrong. The ramp was mounted too close to the tie down holes, so when using ratchet straps, I was unable to use the ramp. I'm going to reposition it to the back. This thing is still rather heavy, but you should be able to mount it to your hitch solo. It's just a bit awkward to do so. We've done 400 miles so far in our RV with the AMC-600 attached. It's an incredibly sturdy rack, has no apparent sway, and nearly zero deflection when loaded up. Admittedly, that's with 200lbs of bikes plus the weight of the rack, well below the rated weight of 500lbs. That kind of load might make me nervous. If there's one downside, it's that this thing hangs quite far behind the motorhome. If you're using this, just remember that your vehicle is now considerably longer than without. This also impacts departure angle, another consideration. I purchased a hitch riser that lifted the setup 12 inches, but that added yet another foot of length. Despite the riser's claim of being able to support 500lbs as well, it just seemed like there was too much leverage now being applied to my hitch. Pros: Sturdy, lightweight, able to support two electric bikes (fat tire bikes will work as well), good attachment points, ramp Cons: Length impacts departure angle. If you're an ebike user, this is a great way to go. I recommend the AMC-600.

Missing bolts, key part of structure missing, frame severely damaged. Clearly been used before.

Using on a 4runner which sits alot higher then a car and it still bottoms out. Also bought a anti wobble bracket as the one supplied is not very good

Bought this for our 85lb fat tire e-bikes. Our previous rack was not friendly when it came to loading the bikes. With this one I can just roll them right up! These are quite long and will stick out the back of your bumper about 4-5'. I welded on a steel roller wheel to protect it against steep driveways from getting ground down. I picked up the steel wheel here on Amazon which are used for the ends of travel trailers. This is a stout and sturdy carrier. I was a bit concerned with the weight of our bikes hanging so far out but the steel square tube on this carrier is very thick walled. it can definitely handle up to the rated weight.

Je pars pour la Floride de Québec et j,apporte mes scooters