VESSEL MEGADORA IMPACTA Impact Driven Screwdriver +3x150 (6") No.980 980P3150

These are essential if you do any kind of work on vintage Japanese bikes. It takes a bit more force than other manual impacts but works excellently and there is zero play in the mechanism. Aside from the end cap and being heavier than a standard driver you wouldn't know it's not a standard driver. Quality is excellent

Didn’t know these existed or that I needed one till I needed one. This worked great removing a screw on my wife’s Honda Odyssey. Used it to change out her rotors. Also serves well as a nice big Phillips screwdriver.

I never review anything but this thing is amazing and a must have for any do it yourself mechanic that needs to remove those pesky rotor screws. A little penetrating oil and a few whacks on this and they came right out. Huge time saver!!!

This no.3 JIS tipped impact screwdriver is good for brake rotor screws on Japanese cars. It works perfectly with regular phillips tips as well. It's not nearly as bulky as regular hand impacts and its easier to handle and manipulate one-handed. The JIS tip is awesome on any type of Japanese made hardware, but works on regular phillipstips just as good. It doesn't try to "cam out" nearly as easy. The shaft is surprisingly tight in the handle and doesn't rattle like I thought it might. The handle is large and sturdy with a steel striking cap on the end. The hard rubber-type material is nice to hold onto. The shaft is a chrome plated carbon tool steel. It has a good weight to it. I like it because it still functions as a regular screwdriver that can stay in the box I carry the most. I don't have to run back to go get my bigger Hand impact every time a screw is stuck, or keep the heavier impact in the box I carry. I simply replaced a regular no.3 with this in the toolbox. I've actually bought the whole set of these now. I'd definitely recommend all three sizes. It's handy to have and I definitely recommend them. Vessel makes an awesome driver.

The screwdriver arrived quickly and looked brand-new. It seems very well made and truly does fit my Acura TL rotor screws perfectly. I have an 09 TL with 190,000 miles and the rotors have never been changed. Front driver side was attempted prior to receiving this screwdriver. Both screws stripped immediately even though penetrating lube & Torch was used. Unfortunately after receiving this screwdriver I tried the passenger side and no luck. The screwdriver seats very well but would not budge the screw. I live in South East US and not near the cost so rust is NOT a problem around our part of the country. These screws were in there with the hand of god though and I had to use a chisel until they broke loose. The screwdriver would not budge them. I still have to do the rear set so I will update after that attempt. Update: I did my rear rotors and unfortunately no luck what so ever. This impact screwdriver would absolutely not budge the rotor screws. I tried and tried but the screws get so stuck from rusting in their threads. Again I took a small chisel and hammer and actually the rear knocked out easier than the front. But the power of the impact function of this screwdriver is just not enough to break the screws loose from their threads. Again I really like the screwdriver it is very well made it seems. I’m sure it would work if the screws weren’t too rusted. But if they are sealed in there stronger forces will be necessary.

Before getting this tool, I mangled many a screw that was rusted into a brake rotor. This design is used by Honda and Hyundai, among others, where the rotor is held to the hub by screws. I have attempted to use screwdrivers, impact drivers, and often eventually just drilled the screws out when they got stripped. But this tool is different. You put it on the screw and hammer it with a big hammer, and the impact breaks loose the rust, while simultaneously applying a slight rotational force to turn the screw loose. I think it works best with a heavy hammer (like a small sledgehammer, 4 to 5 lbs). Hit it solidly 4 to 5 times, and that is just right to break the screw loose. From there it can be easily removed. The tool can be used to hand-tighten the screws back in as well. This is basically a heavy-duty screwdriver with a special feature to turn counter-clockwise slightly with each blow. It feels very sturdy, and I can't imagine this tool breaking, even if hammered on aggressively with a large hammer. I am very pleased with how much easier this tool has made an otherwise difficult task.

GREAT SCREWDRIVER

A must have for removing screws on rotors. It was much easier than using a basic screwdriver.

Perfect for JIS (Japanese Industry Standard) screws on japanese cars and motorcycles; also beats your standard Phillips driver on Phillips screws as it doesn't cam out. Try and get a brake disc (rotor) off a Mazda without one of these! Unique impact action makes it the best screwdriver IN THE WORLD (in my humble opinion). This of course applies to all sizes of Vessel Impacta screwdrivers. Arigatou gozaimashita

グリップが滑りにくく、ドライバーとしての性能が優秀ゆえインパクトドライバーとして使わずとも緩んでしまいました。それくらい使いやすいです。3番のドライバーを買うならこれを買っておいてもいいかも？素人考えですが。

Excellent produit destinee aux marche Japonais. Tres utile pour sortir les vis JIS, pour laquelle une tournevis philips faite trop des degats. D'aillures, cette tournevis JIS marche bien avec les vis philips.

The P3 and P2 Impacts Screwdrivers were exactly what was required. I couldn’t have done it without these specialty screwdrivers. They were definitely “the right tool for the job”.

De VESSEL MEGADORA IMPACTA ligt goed in de hand en werkt precies zoals je mag verwachten. Ik kocht hem nadat ik tijdens de restauratie van een oude Japanse motor twee schroeven had gesloopt. Sinds ik deze jis schroevendraaier gebruik, heb ik nergens meer last van. Een degelijk en betrouwbaar hulpmiddel voor dagelijks gebruik